Welcome to the halfords workshop, they replaced the battery for me. After replacement, manual traction control abs flashes all the time.
after connecting the computer, no abs coding.
how to generate such a code or let someone help

vin : TMBBE73T5A9019178

Part No SW: 3T0 907 379 C    HW: 3T0 907 379 C

Component: ESP MK60EC1   H45 0104

engine 2.0 tdi 103kw code engine BMP

right-hand drive

only has an on / off traction switch

3 minutes ago, maniocyar said:

Welcome to the halfords workshop, they replaced the battery for me. After replacement, manual traction control abs flashes all the time.
after connecting the computer, no abs coding.
how to generate such a code or let someone help

vin : TMBBE73T5A9019178

Part No SW: 3T0 907 379 C    HW: 3T0 907 379 C

Component: ESP MK60EC1   H45 0104

engine 2.0 tdi 103kw code engine BMP

right-hand drive

only has an on / off traction switch

frond disc  312

rear disk 282

 

You're saying the coding in the ABS module has been set to all zeroes?

 

You should be able to use the long coding helper to walk you through setting it up again.

so was lost

Variant coding : 00_00_00_00_00_00_00_00_00_00_00_00_00_00_00_00_00_00

and you can't generate such code

3 minutes ago, maniocyar said:

and you can't generate such code

VCDS has a function called Long Coding Helper which shows you what the options are for each byte in the long coding. You can use that to tick the boxes that apply to your car and it will generate the long coding.

At the moment I do not have vcds, I ordered that I will have fun.
I thought there was someone able to generate it

 

So what scan tool have you been using until now? Some cheap tools have been known to mess up coding on control modules.

 wow

If the coding was lost during the battery replacement by Halfords, I'd demand Halfords fix it.

 

Even if that is just Halfords paying Skoda to recode it...