Good evening to all . I want to share with you my experience with coding rear fog lights
my car is a Skoda Octavia mk3 vrs MY2015  and during the coding of the first 2 parameters nothing changed. However, when I did the 3rd coding, then the right (left-hand drive) fog light was activated. I want your advice on whether I need to remove any coding from the 3.

Best regards

VV

 

 

 

Edited 18 February, 20215 yr by 4WDDSG6

Hello again , can any one from the experts tell me if i made something wrong?

Can you post a full autoscan and an adaption map from 09?

before or after coding ?

Ideally both for the adaptation map so we can see before and after values 👍

Hello again , i full autiscan before and after coding and adpmap chanel above 

 

Regards

 

VV

 

Log Mk3 Vrs Mqb after coding scan.txt Log Mk3 Vrs Mqb before coding scan.txt adpmap-09-5Q0-937-084-AJ.CSV

Edited 22 February, 20215 yr by 4WDDSG6

Looks correct to me

 

Out of curiosity, what was Leuchte26NSL LA72-Lichtfunktion A 26 set to before you changed it?

40 minutes ago, langers2k said:

Looks correct to me

 

Out of curiosity, what was Leuchte26NSL LA72-Lichtfunktion A 26 set to before you changed it?

     Leuchte26NSL LA72-Lichtfunktion A 26 - Nebelschlusslicht wenn kein Anhaenger gesteckt und Rechtsverkehr 

Cool, then yes, "Nebelschlusslicht wenn kein Anhaenger gesteckt" should be find for both channels

Hello, does someone know how to code the following?

 

1. Raise window after door opening

(I don't mean comfort option - currently when I open the door (ignition off), raising the windows are disabled on door panel)

2. Interior lights off when opening trunk / hatch

3. Mirrors' light on when reversing

4. Dimming license plate's light to max when reversing 

 

Cheers