Hi,

First post and hoping for some help. I have been very silly and was taking out my Dash Cam which was hard wired in. I stupidly didn't check which fuse socket I was pulling the hard wire kit out of! I am now very confused as airbag light has come on, cruise control wont work, fans wont work and AC doesn't work!!!  Now I don't know if this is down to me unplugging the dash cam fuse or if it is just a coincidence. I have attached some pics so hope someone can point me in the right direction. I don't want to put the wrong fuse back in etc. 

Thanks in advance. 

This is the fuse panel from a 2018 1.0 SE Tech. I would say your feed needs to plug back in to the bottom row, 2nd position in from the left. If the fuse protecting the car circuit is 7.5A then that's confirmation.

 

This is marked as infotainment screen in the handbook.  Who knows if this will fix your issues? Other suspects are 15 (A/C)  (2nd from right on lower minifuses), 24 (blower for A/C) (5th from left on right hand middle row between the square fuses), not 31 - (this is also fuel pump so the car won't run).

 

Finally - not impossible the previous owner just stuck it in a switched live socket that worked for him. But that wouldn't explain your other faults.

 

 

Solved!! Airbag fuse, should have spotted it earlier but worked it out from your fuse box so thanks. Putting the fuse back in the airbag fuse holder has solved all issues. Who would have thought it would have caused all the above problems.