6 hours ago, varaderoguy said:

Okay ...here is the coding. See Page 2 for the specific coding you need. It works with all MIB systems (not just the advertised Columbus). I've tried it on a Bolero and Amunsden too and it works just fine.

 

 

 

My card doesn't accept this modification. don't know why?

 

 

You need to hard reset the unit by pressing and HOLDING the power button for 8 seconds.

2 hours ago, varaderoguy said:

You need to hard reset the unit by pressing and HOLDING the power button for 8 seconds.

 

I will give it a go right away now.. then will try with adaptation as i dont have any credit in obd11 anymore.

Doesn't work. It says "(31) Function not available." i did reset infoteinment system by press holding the menu button for 8 secs..but nothing helps.

Okay ...I think you are going to need access to somebody with VCDS. Have a look on the VCDS section of the forum and get them to check the coding for you. ODBeleven is not perfect (it is considerably better than it used to be) and it can induce coding errors. You also need ODBeleven Pro to make manual changes to the adaptions and coding manually.

I think I can say with complete confidence, you’ve now spent more time trying to enable the automatic change than you would have just manually changing it over your entire ownership of the vehicle. HTH 👍🏻

3 hours ago, varaderoguy said:

Okay ...I think you are going to need access to somebody with VCDS. Have a look on the VCDS section of the forum and get them to check the coding for you. ODBeleven is not perfect (it is considerably better than it used to be) and it can induce coding errors. You also need ODBeleven Pro to make manual changes to the adaptions and coding manually.

 

Mine is OBD11 pro. Well, probably coding will be the only option to do it instead of adaptation.