Hi,

 

I have OBDEleven and I am curious to know where I would find the values that people always look for in VAG DPF to see if there car is re-genning too much.

I believe its the Soot Calculated, Soot Measured and Oil Ash Content values? (any i've missed?)

 

Is it in a nice easy to find place or do I need to go hunting?

 

I appreciate it will probably not give me a nice visual like VAG DPF but if the values are there then I can at least see them without shelling out on another OBD11 dongle just to see them.

 

Many thanks.

I don't know that tool very well, but Engine is the location and you need to read the Measured Value Blocks (MVB's as they are often reffered to)

 

20 hours ago, varooom said:

I don't know that tool very well, but Engine is the location and you need to read the Measured Value Blocks (MVB's as they are often reffered to)

 

 

So I found the following:

Particle Filter, soot mass calculated: 10.53g

Particle Filter, soot mass measured: 3.27g

Particle Filter, Oil ash mass: 22.89g

 

As you said, these were in the Engine section, under the Live Data header. 👍

1 hour ago, Slick2097 said:

 

So I found the following:

Particle Filter, soot mass calculated: 10.53g

Particle Filter, soot mass measured: 3.27g

Particle Filter, Oil ash mass: 22.89g

 

As you said, these were in the Engine section, under the Live Data header. 👍

Those values look healthy, I think now you are poking around in the car, I am sure you can find other values that would assist.

 

I think there will be time since last regeneration and distance travelled too, every little information you learn now will be helpful.