The PDC Connector is to the left of the BSM module, on the right side of the car.  

There is another connector on the black diffuser, so u can remove the diffuser without having to remove the whole rear bumper.

See images below.  

 

 

 

This is the coding and adaptations of my boot lid module.

 

Backup

    Control unit: 6D Deck Lid Control

    System description: HDSG-Modul

    Software number: 5Q0959107L

    Software version: 0261

    Hardware number: 5Q0959107J

    Hardware version: H13

    Serial number: 31249117700000

    ODX name: EV_DeckLidCONTIAU736

    ODX version: 001014

    Backup name: 6D Boot Lid

    Long coding:

        1008

 

    Adaptations:

        Program opening stop:

            Program opening stop:

                2010

        Offset for maximum programmable opening stop:

            Offset for maximum programmable opening stop:

                20

        Minimum opening height of tailgate:

            Minimum opening height of tailgate:

                600

        Offset for opening height after basic setting:

            Offset for opening height after basic setting:

                0

        Detection area upper:

            Detection area upper:

                10

        Opening height in production mode:

            Opening height in production mode:

                60 %

        Activating and deactivating all development messages:

            Activating and deactivating all development messages:

                not active

        Deactivate production mode:

            Deactivate production mode:

                Deactivating

        Production mode:

            Activation due to excessive pressure on rear lid:

                not active

            Opening height in production mode:

                not active

            Opening and closing rear lid:

                not active

            Tone sensor:

                not active

            Activation of rear lid with reduced speed:

                not active

            Calibration:

                not active

            Checking the rear lid button:

                not active

        Tailgate reverse path:

            Reverse path when closing:

                7

            Reverse path when opening:

                4

        Deactivation of tailgate:

            Deactivation of tailgate:

                active

        Dectivation of the luggage compartment cover:

            Dectivation of the luggage compartment cover:

                not active

        Deactivation of tailgate while in trailer operation:

            Release button in rear lid handle:

                active

            Using button to close lock. mechanism in tailgate handle:

                active

            Button for opening rear lid in luggage compartment:

                active

            Rear lid lock button in luggage compartment:

                active

            Sensor for rear lid opening:

                active

            Remote ctrl, opening with button for tailgate unlock. mechan.:

                not active

            Remote ctrl, closing with button for tailgate unlock. mechan.:

                not active

            Opening with button for remote unlocking of tailgate:

                not active

            Closing with remote unl.button of tailgate when using a trailer:

                not active

            Using sensor to open tailgate:

                not active

            Using sensor to close tailgate:

                not active

            Opening with button 2 for remote unlocking of rear lid:

                not active

            Closing with remote unlock.butt.2 of rear lid when using trail.:

                not active

        Ausstattungen aktivieren:

            Engine 2:

                active

            Motor 2, sensor system:

                active

            Tone sensor:

                not active

            Clamping strip 1:

                not active

            Clamping strip 2:

                not active

            Clamping strip 3:

                not active

            Clamping strip 4:

                not active

            Temperature sensor 1:

                active

            Temperature sensor 2:

                active

            Closing assist motor:

                active

        Luggage compartment cover, tolerance of the block counter:

            Luggage compartment cover, tolerance of the block counter:

                0

        Luggage compartment cover, maximum no. of block drives:

            Luggage compartment cover, maximum no. of block drives:

                0

        Luggage compartment cover, reverse path after obstacle recogn.:

            Open:

                0

            Close:

                0

        Luggage compartment cover, detection area:

            Detection area lower:

                0

            Detection area upper:

                0

        Luggage compartment cover, adjust. track tolerance:

            Luggage compartment cover, adjust. track tolerance:

                0

        Luggage compartment cover, number bloom drives:

            Luggage compartment cover, number bloom drives:

                0

        Luggage compartment cover, excess limitation in exclusion area:

            Luggage compartment cover, excess limitation in exclusion area:

                not active

    Mileage: 74509 km

    Date: 2023-04-20 14:19

-----------------------

 

On 20/04/2023 at 14:59, Seba800 said:

Today i try open trunk with foot and it works open and close flyless.. 

But it works only when car is not locked. 
when its locked doesent work. 

Hello, i have the same problem with Easy open not working and static error U10DC00 in the B7 Kessy module. Did you ever fix the problem? I looked at the cable and it looked solid. Is there a fuse i should check?