I want to put carbon fiber vinyl wrap on the oak wood section of my Octavia’s interior and have a few questions 

 

1. Is it simple enough once I look at a few YouTube videos to do a DIY job or is it best to get a professional?

 

2. I’ve measured the total wooden area to be 5.2m does this mean I need a total of 5.2 ish metres (extra metres just in case) to cover the wooden area?

 

3. If anyone has done this before does it come out well and does the vinyl have a chance of peeling off?

 

4. Is the type of vinyl I have on Amazon in the screenshot sufficient?

 

6 hours ago, Tiernan said:

I’ve measured the total wooden area to be 5.2m does this mean I need a total of 5.2 ish metres (extra metres just in case) to cover the wooden area?

"5.2 metres" is a linear distance, not an area. Personally I'd rather have real (or fake) burr walnut than fake carbon fibre.

The stuff in the screenshot should work fine ,i imagine it will be a fiddly job and should look better than fake wood ,what were skoda thinking it should be left in the 70s haha on old austins and rolls ,good luck you never know till you try 👍

You might as well since really the parts need removed have them hydro dipped.

 

http://dipworx.ie