Skip to content

A fuse blew, and now VCDS cannot connect to Module 03

Featured Replies

:) Hello !

Car: ( 2012 ) Skoda Octavia-2 FL  'SCOUT'    1.8 TSI

Car info:  6-speed manual gearbox and 4-motion ( Haldex-4 )

Yesterday Sunday morning the car was driven and everything worked as usual.
After about 3 hours I was going to leave again and then suddenly the instrument cluster was completely black and nothing in the instrument cluster worked.
Tried to start the engine, but it died immediately after about 2 seconds.
Tried a couple more times but each time the engine started and ran for about 2 seconds and then died.
( felt roughly like the immobilizer came into play. )
After looking at the fuses I found that fuse # 6 was blown.
( Has never happened before )
With a new fuse, the instrument cluster started working and the car could be started and worked :thumbs: perfectly.

...Today when I did a fault code reading with VCDS to see which error codes were left,
I discovered that in Module-03 there were error codes,
but when I tried to delete them, VCDS could not communicate with that module....

I tried several times to delete the error codes but it is not possible
to delete the errors as VCDS replies that it cannot communicate with Modul-03

:confused: What is going on and why can't VCDS communicate with Module-03 ? :confused:


FUSE # 6. ( 5 Ampere )
Instrument cluster, Control unit for automatic gearbox,
Control unit for electromechanical power steering, Parking aid, Haldex clutch.


[CODE] 

Monday,10,June,2024,19:56:50:09910
VCDS -- Windows Based VAG/VAS Emulator Running on Windows 11 x64
VCDS Version: 23.11.0.0 (x64)  HEX-V2 CB: 0.4643.4
Data version: 20231027 DS351.0
www.Ross-Tech.com


VIN: TMBKK61Z3C2064867   License Plate:
Mileage: 191510 km         Repair Order:

 

--------------------------------------------------------------------------------


Chassis Type: 1Z-SK35 (7N0)
Scan: 01 03 08 09 10 15 16 17 19 22 25 42 44 46 52 55 56 62 69 72
         

VIN: TMBKK61Z3C2064867   Mileage: 191510 km

01-Engine -- Status: OK 0000
03-ABS Brakes -- Status: Malfunction 0010
04-Steering Angle -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
10-Park/Steer Assist -- Status: OK 0000
15-Airbags -- Status: OK 0000
16-Steering wheel -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
22-AWD -- Status: OK 0000
25-Immobilizer -- Status: OK 0000
42-Door Elect, Driver -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
46-Central Conv. -- Status: OK 0000
52-Door Elect, Pass. -- Status: OK 0000
55-Headlight Range -- Status: OK 0000
56-Radio -- Status: Malfunction 0010
62-Door, Rear Left -- Status: OK 0000
69-Trailer -- Status: OK 0000
72-Door, Rear Right -- Status: OK 0000
-------------------------------------------------------------------------------


Address 03: ABS Brakes (J104)       Labels:. 1K0-907-379-60EC1F.clb
   Part No SW: 1K0 907 379 BJ    HW: 1K0 907 379 BJ
   Component: ESP MK60EC1   H31 0121  
   Revision: 00H31001    
   Coding: 113B401C0A2800FE881302EA50200041310000
   Shop #: WSC 73430 790 00083
   VCID: 7BA3F0FAA3E70BB27A1-802E

7 Faults Found:
01324 - Control Module for All Wheel Drive (J492)
            004 - No Signal/Communication - Intermittent
             Freeze Frame:
                    Fault Status: 00100100
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 157
                    Mileage: 191453 km
                    Time Indication: 0
                    Date: 2018.11.01
                    Time: 14:51:28

             Freeze Frame:
                    Count: 0
                    Count: 32768
                    Count: 4608
                    Count: 8202
                    Count: 50944
                    Count: 1
                    Count: 1793
                    Count: 0

01309 - Power Steering Control Module (J500)
            004 - No Signal/Communication - Intermittent
             Freeze Frame:
                    Fault Status: 00100100
                    Fault Priority: 3
                    Fault Frequency: 1
                    Reset counter: 157
                    Time Indication: 0

             Freeze Frame:
                    Count: 16384
                    Count: 12
                    Count: 12800
                    Count: 8213
                    Count: 43776
                    Count: 0
                    Count: 1279
                    Count: 0

01317 - Control Module in Instrument Cluster (J285)
            004 - No Signal/Communication - Intermittent
             Freeze Frame:
                    Fault Status: 00100100
                    Fault Priority: 3
                    Fault Frequency: 1
                    Reset counter: 157
                    Time Indication: 0

             Freeze Frame:
                    Count: 16386
                    Count: 12
                    Count: 12800
                    Count: 8208
                    Count: 44032
                    Count: 0
                    Count: 1535
                    Count: 0

03391 - Coding Not Possible
            000 - - - Intermittent
             Freeze Frame:
                    Fault Status: 00100000
                    Fault Priority: 6
                    Fault Frequency: 1
                    Reset counter: 157
                    Time Indication: 0

             Freeze Frame:
                    Count: 2
                    Count: 12
                    Count: 12288
                    Count: 8254
                    Count: 44544
                    Count: 0
                    Count: 1279
                    Count: 0

00474 - Control Module for Immobilizer
            004 - No Signal/Communication - Intermittent
             Freeze Frame:
                    Fault Status: 00100100
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 157
                    Time Indication: 0

             Freeze Frame:
                    Count: 2
                    Count: 12
                    Count: 12288
                    Count: 8211
                    Count: 44544
                    Count: 0
                    Count: 1279
                    Count: 0

01299 - Diagnostic Interface for Data Bus (J533)
            004 - No Signal/Communication - Intermittent
             Freeze Frame:
                    Fault Status: 00100100
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 157
                    Time Indication: 0

             Freeze Frame:
                    Count: 2
                    Count: 12
                    Count: 12288
                    Count: 8233
                    Count: 44544
                    Count: 0
                    Count: 1279
                    Count: 0

00778 - Steering Angle Sensor (G85)
            004 - No Signal/Communication - Intermittent
             Freeze Frame:
                    Fault Status: 00100100
                    Fault Priority: 2
                    Fault Frequency: 1
                    Reset counter: 158
                    Time Indication: 0

             Freeze Frame:
                    Count: 16386
                    Count: 12
                    Count: 12800
                    Count: 166
                    Count: 44032
                    Count: 0
                    Count: 1279
                    Count: 0

-------------------------------------------------------------------------------



Address 56: Radio (J503)       Labels:. 5M0-035-1xx-56.clb
   Part No SW: 1Z0 035 156 F    HW: 1Z0 035 156 F
   Component: BOLERO        010 0061  
   Revision: 0A001001    Serial number: SKZ1Z3L9543733
   Coding: 0F0004000001
   Shop #: WSC 73430 790 00083
   VCID: 353726C2C5431DC2CC5-8060

1 Fault Found:
00857 - CD Changer Unit (R41)
            004 - No Signal/Communication
             Freeze Frame:
                    Fault Status: 01100100
                    Fault Priority: 5
                    Fault Frequency: 1
                    Reset counter: 121
                    Mileage: 191510 km
                    Time Indication: 0
                    Date: 2018.11.01
                    Time: 18:55:16


-------------------------------------------------------------------------------

 

End----------( Elapsed Time: 01:12, VBatt start/end: 14.2V/14.1V )-----------
 

[/CODE]

Edited by 2stroke

  • Sponsor

There's probably another blown fuse, one associated with the ABS module.

I can probably tell you which are good candidates a bit later.

  • Sponsor

Check cabin fuse No. 2 (5 Amp), and under bonnet fuses No. 4 (20 Amp) and No. 25 (40 Amp).

  • Author
14 hours ago, Breezy_Pete said:

There's probably another blown fuse, one associated with the ABS module.

Check cabin fuse:
No. 2 (5 Amp)
Check under bonnet fuses: 
No. 4  (20 Amp) 
No. 25 (40 Amp)

The # 2 cabin fuse was ok.

Are these the right ones under the bonnet ?
If yes, they are also ok.


 

Under huven säkrings box 22.jpg

Edited by 2stroke

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Important Information

Welcome to BRISKODA. Please note the following important links Terms of Use. We have a comprehensive Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Account

Navigation

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.