Hi there, the radio station logos on my Columbus MIB1 have disappeared.

I have downloaded new logos to SD card and followed instructions to install them, I can see them on the SD card

But they won’t transfer and install.

Any help would be greatly appreciated.

If its like mib2 you can pick each one up by hand. It's not a bulk update. Check a mib1 manual. An adhoc way of uploading them existed. It was supported by Vag. Mib3 they scrapped it. Expect it was in mib1. You select the station then pick each one off from the SD card as I recall by holding onto the button or something. Probably Google AI assistant will help.

This is how to do it in mib2. I wrote a how to for that. Mib1 will be similar.

https://www.seatcupra.net/forums/resources/radio-logos-mib-2-only.43/

Trusty DV52 / Don is on the subject

https://www.golfmk7.com/forums/index.php?threads/radio-icons-gen-1-units.325205/

This is where they are over the air or not. If not over the air, you in fill as per my link on mib2. Mib1 will be the same but need to be correctly sized. No user infilling with mib3. Mib1 and mib2 is whether over the air and making good where missing.

Edited 9 May, 20251 yr by Tell

Thanks for that, I can select each logo individually from the SD card, they are correct size and format they just won't install.

My local dealer also had no success, I'm wondering if it is a firmware or software issue.

Are you sure they are the correct size ?. If the images are from a home brew site they may not be. The pick them from the site I linked will be since they are for the Vag units of that vintage. I could see the mibsolution.one ones or via that Phonestar site may not be, perhaps.