Hmm,

changing the mud shields on my brakes (2014 CTHE 1.4 VRS fabia) rears fit no problem, fronts however were supplied too small (twice, cross referenced vin and ordered from Skoda) disks are 288mm diameter (STD VRS ones) and I'm unable to source the correct mud shields.

These are the part numbers that match (but don't) my VIN

Has anyone been through this minefield previously and ascertained the correct part numbers ?

As ever any assistance greatly welcomed

I had a Fabia MK2 and this car from the vin should have had 256mm size vented frnt discs fitted but it turned out they were 282mm size i remember getting the shields from Autodoc the only drawback is the potage cost but if i remember it still worked out cheaper than the dealership (which they kept saying was the smaller ones) Pads were the same they kept giving me the wrong typei found out mydelf by looking at them and then looking at the different types ,turned out to be Lucas pads

12 hours ago, Murdockman said:

I had a Fabia MK2 and this car from the vin should have had 256mm size vented frnt discs fitted but it turned out they were 282mm size i remember getting the shields from Autodoc the only drawback is the potage cost but if i remember it still worked out cheaper than the dealership (which they kept saying was the smaller ones) Pads were the same they kept giving me the wrong typei found out mydelf by looking at them and then looking at the different types ,turned out to be Lucas pads

Don't suppose you have a record of the part numbers ?

Typical VAG part numbers confusing everyone, the last letter can make all the difference…..

The part numbers for 288mm discs are

6R0615312D

6R0615311D

https://www.skoda-parts.com/spare-part/6r0615311d-brake-shroud-front-left-skoda-24180.html

Edited 26 May, 20251 yr by UrbanPanzer

@UrbanPanzer Thanks