Hi

As the title suggests, my 2017 Yeti has a defective n/s Front indicator bulb holder.

The bulb itself is a Philips PWY24W 12V 24W - Single Bulb

The bulb is fine, but somewhere within the bulb holder there is a bad connection.

The bulb holder itself has two vertically aligned clips holding it in place with a square plastic alignment tab on the side and two double contacts within for the bulb, which end up with 2 grey wires running into the loom.

Does anyone have a Part Number for that bulb holder please?

I am having a real struggle trying to identify the part.

Thanks in hope.

Edited 27 July, 202527 Jul by Yetianimal
Type of bulb

OK....I've had to do some deep digging here.

The bulb holder is NOT available as a separate part !!

You need to buy what Skoda call an Electrical installation wiring bundle for the Front Halogen headlights intended for vehicles manufactured after MR2014 (face-lift model).

The PART NUMBER is

5LO 941 813D

Cost is around £40.

I've ordered one, and will cut off and splice the new holder into the existing wiring, as otherwise it means stripping back the loom which I'm reluctant to do.

It's only a simple 2 wire connection.

For those of you who may get the same issue.... here's the culprit !!