Skip to content

Egr problem wiring ?

Featured Replies

Fitted a new egr valve , plug looked ok ,pins ok , still have egr code po 40300 and showing no live data , I need to check pins next but is there anywhere that the wiring rubs or breaks ect

  • Sponsor

What year is the car and which engine type does it have?

  • Author

It's 2012. ,1.2 TDI ,new egr fitted but still has same code and glow plugs light flashing,I was going to find out what voltage I think should be 5 v at which pin , and wanted to know iif there was a common place wiring may be damaged

  • Sponsor

Pinout/wiring shown here Grey box at top is engine ECU. Brown wire is earth. 5V on pin 1.

No idea whether there are any common loom damage points; probably quite tricky to see if it's down the back of the engine.

Screenshot 2026-08-10 143353.png

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.