Skip to content

Fabia Mk3 Bolero (P0369T): Android Auto, wireless dongles and Bluetooth all stopped working. Reflash refused, 0480T won’t instal

Featured Replies

Hi all,

Android Auto worked fine in my Fabia Mk3 until 7 November 2026, then stopped. I hadn’t made any changes. I’ve been through everything I can find and I’m stuck.

Unit

  • Skoda Fabia Mk III, Bolero (MIB2 Standard, Technisat)

  • SW train: MST2_EU_SK_ZR_P0369T

Symptom

  • Android Auto on the phone detects the car and tells me to go to the head unit to continue.

  • The head unit then abandons the connection and drops. The screen shows MirrorLink, then it disconnects.

  • It then re-initiates the sync over and over and never gets anywhere.

  • It’s the same across multiple phones and multiple cables. I’ve cycled through the cables.

  • I suspect something at the protocol level.

What fails

  • Samsung S24 Ultra, wired, with several known-good cables

  • Samsung Galaxy A8 (2018), wired: Android Auto won’t initialise

  • Two different plug-in Wi-Fi Android Auto dongles: each one attempts, sees the phone, then abandons

  • iPhone (a passenger’s) over Bluetooth: it pairs, the car presents it and there’s a handshake of some sort, but audio and other functions won’t connect. The passenger tried several times without success.

What I’ve done on the car

  1. MENU > SmartLink > Android Auto, selected manually

  2. SmartLink reset

  3. Factory settings > Restore factory settings (full reset); all settings cleared and everything re-paired from scratch

  4. Reflash of MST2_EU_SK_ZR_P0369T from SD (FAT32, files in root): the unit won’t accept it

  5. MST2_EU_SK_ZR_P0480T from SD: doesn’t work

What I’ve done on the phone (S24 Ultra)

  1. Cleared the Android Auto cache and all settings

  2. Uninstalled and reinstalled Android Auto updates; phone fully updated

  3. USB data to a PC works, so the phone’s port is fine

Tools: OBD2 reader only. Probably dead, a cheapo clone. No VCDS.

Similar threads I’ve found

My questions

  1. Has anyone had Android Auto, Wi-Fi dongles and Bluetooth all fail together on a Bolero, with the sync looping like this? What fixed it?

  2. Is there a way to force a reinstall of P0369T without VCDS?

  3. Does this point to a failed glove-box unit, or something at the protocol level?

Thanks.

Edited by yewneek
detail

Yes. Typical problem is either FEC/SWaP corruption or EMMC failure. Pls go to service menu (long press MENU button) and check what are installed FEC/SWaP codes and if they are valid.

  • Author

Here!

1000086242.jpg

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Important Information

Welcome to BRISKODA. Please note the following important links Terms of Use. We have a comprehensive Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Account

Navigation

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.