Simple question really. Can you get front camber kits for a fabia?

Cheers

judging by the lack of answers John i would say not

i could undo the alloy consoles and move them out as much as possible , but you would obviously have to keep an eye on the camber to get it equal both sides

also another possibility could be a different wishbone or ball joint which was slightly longer, maybe another VAG vehicle has a similar set-up as the Fabia but with a slightly longer wishbone length , check the specs for Ibiza Cupra or Polo GTI

Just be carefull pushing out the bottom as that can have a negative effect on the castor.

Cheers guys.

Currently waiting for details from BBR and allard.

Without modifying the body where the struts mount I dont see how you can really adjust the front camber.

Spoke with Morego. They modify the wishbones to create increased negative camber (Power Grip suspension). It will take a full days work and its a little on the pricey side for as a surcharge in included.

Spoke with Allard. They dont offer anything.

Theirs a couple of upper suspension mount that you can buy from the states to help increase negative camber.

Simple question really. Can you get front camber kits for a fabia?

Cheers

Is the strut top mount like the Octy or any other Golf ie mk 2 or 3. If so you can get top mounts.

I have these on my Octy, which are for a Golf iv

You can get them for the Golf 2 and 3 also

There are quite a few parts in the vag range which are interchangable. Its just a matter of doing comparisons.

You can get ball joint extensions made, but to do it right, you also need a drive shaft spacer. You don't want a cv joint popping off.

If the above top mounts won't fit, then ring Allard a ring and ask for Dave Turner's phone number. He does all their race car suspension set ups and will be able to sort you out with a ball joint and drive shaft spacer.