Is anyone using these?

LINK

They look ok for the price!

I saw these earlier, and they do look good for the price.

I'm also interested to see if anyone has used these.

QH are a good quality pattern part, im guessing they buy them cheap and machine them up themselves.

QH are a good quality pattern part, im guessing they buy them cheap and machine them up themselves.

So it looks like they are machined after being heat treated :thumbdwn:

Personally I wouldnt use them.

These however look like a great buy.

SKODA OCTAVIA 1.8 T MINTEX FRONT BRAKE DISCS & PADS . on eBay Skoda, Car Parts, Cars, Parts Vehicles

Personally I wouldnt use them.

These however look like a great buy.

SKODA OCTAVIA 1.8 T MINTEX FRONT BRAKE DISCS & PADS . on eBay Skoda, Car Parts, Cars, Parts Vehicles

I had these fitted on my S3

They were ok but after a few weeks I got the annoying squeak & squeal :thumbdwn:

I guess for a standard Vrs they would be ok!

It looks like Zero Sixty's & Extream's then

Personally I wouldnt use them.

These however look like a great buy.

SKODA OCTAVIA 1.8 T MINTEX FRONT BRAKE DISCS & PADS . on eBay Skoda, Car Parts, Cars, Parts Vehicles

I have these on my fronts, doing the job well to date.

.......but i dont drive hard.

I'd be happy enough about using QH parts, but not about using discs that had been heat-treated then grooved or cross-drilled. Part of the reason for heat-treating after machining is to relieve stresses which weren't there before, and were induced by the localised heating from the machining treatments.