e301988325i
Members
-
Joined
-
Last visited
Everything posted by e301988325i
-
-
-
-
I assume there is a setting in VCDS to tell the car it has a new/clean DPF
-
It doesn't give you accurate result if the car isn't recording all of the miles it's driven!!!
-
I found an error code stored related to this software update and a parameter change is required to solve it: 1555 - Check Software Version Management B201A 00 [009] - - Details of the fix https://forums.ross-tech.com/index.php?threads/18798/
-
See my posts here about actually flushing the heater matrix!
-
Tested using cruise control, I noticed that my speedo was reading 10% down on my relatively new to me octavia with new 225/45 R17 tyres. VCDS -> Modules -> Instruments -> Long Coding Mine was originally set to option 0, option 1 made no difference, option 2 has made the speedo very accurate, I estimate reading 0.5mph lower than GPS. There are a total of 8 options. Since the change naturally the MPG has increased by 10% as the car is accurately recording the mileage it travels. However, I have to assume that my 126k is in fact 139.5k. Used info from this thread to assist: https://forums.ross-tech.com/index.php?threads/402/
-
I do not agree they are serviceable wear items. There are two conditions, working or not. Replace one at a time. I have heard of multiple garages refusing to replace 1 glow plug and insisting to do the whole set which is a problem if they are throwing a £130/glow plug at your car for no reason.
-
Garage warned us about the EGR cooler leaking coolant straight in to the exhaust.
-
-
My partners car had a lack of heat on the drivers side and heavy contamination from exhaust in the coolant, it came out muddy brown which can't be good. Reading about the difficulties of flushing this engine and having to essentially replace the coolant 5 times, I took the expansion tank off, the two bottom radiator hoses, and the top connection to the heater matrix then basically aimed my hose pipe with a nozzle into all of the unplugged connections until the water coming out ran clear. After a couple of hundred miles there is still some minor contamination but it's far better than it was.
-
For what it's worth to drain the coolant; Undertray off, expansion cap off. Ignition on, heater to Hi Pull the connector from the temp sensor on the bottom left radiator hose, then the bottom left radiator hose. Then pull the bottom right radiator hose for the charge cooler circuit. Refit hoses and refill, drive on local roads where you can stop regualrly, expect to get alarms for low coolant around three times, stop, top up, continue driving.
-
Well yeah, it's a Euro 5 EA288. No recalls come up. Why wouldn't you touch it?
-
Do you have any info? I've just got an early 13 plate 2.0TDI MK3 and it doesn't have the pressure sensor on the 3rd glow plug and there is something different around the end of the exhaust cam on the side of the head compared to my other 66plate 2.0TDI. As well the later car is significantly better on fuel.
-
My (2013) wheels have corrosion which is causing a loss of pressure where it's around the bead. Are the golus alloys prone to this? I'm wondering if it's better to get different wheels from another octavia or VAG vehicle instead of refurbishing mine. Which vehicles are a direct fit, I assume MK5 golf of the same age, seat Leon of the same age, any others?
-
Well that's 2024 maps from VW DISCOVER PRO installed on my 2013 MIB1 columbus! Now it's time to try and find a software update. Edit: Columbus MIB1 0411 download found here https://www.briskoda.net/forums/topic/417533-columbus-mib1-0409-firmware/page/4/#findComment-5053866
-
I have a 2013 Octavia III with columbus that has never been updated, hardware H40, software 0111, maps ECE 2013. The cars vin isn't recognised in Skoda's update portal. Any ideas of where to go now? Edit: from Mib-helper I have found that software 0411 is the latest but I have no idea where to find it, the link from mib-helper is dead. https://mib-helper.com/index.php?train=mhig_eu_sk_P0071#details
