Skip to content

wirer

Members
  • Joined

  • Last visited

Everything posted by wirer

  1. I also found a photo where an 8K unit was mounted in Fabia 3/Rapid - it reports an error in the back
  2. The my photo above also shows the 294E. Well, I definitely have it adapted for Fabia 7K. So just mount it. It has happened to me twice that the promised 7K unit from Octavia came instead. Then it didn't work because the Octavia had 8K
  3. The part number is identical. This is what the data is copied to the unit. Some even can "convert" from 8K to 7K. If the unit is 8K on the Fabia 3, it will report an error
  4. You need 7K unit, not 8K As far as I know, no one except Fabia and Rapid uses 7 sensors. It takes me a bit of time to convert a PDC to a PLA, because there is no combination of 7 sensors + 4 sideways I make my own cables at home. I order connectors, pins and I'm playing -- Sorry for my english
  5. the instrument panel has its own backlight sensor. cannot be combined with automatic lights
  6. allegro.pl, you need to buy the whole air conditioning panel from VW Polo, disassemble, mill and redo to fit the F3
  7. in the comments I mention another holder. the driver's feet just put under the screw, the passenger one hole in the passenger box and that's it. there is no need to invent anything
  8. i have... https://wirer.sk/led_nohy/
  9. it is a picture from the workshop manual. the part in the ring is just a "fuse" so that the part with the word airbag does not fall out
  10. https://wirer.sk/f3_cierna-stropnica/
  11. hello, i retrofited rear electric window (from mechanical to electric pulling). the rear windows work fine for me. driver motor window is also changing (from 5JA 959 811 K to 6V1 959 801 B), modified I have a complete wiring according to the diagram. and there is a problem coding changed according to another car with electric rear windows. I already have a visible motor for the driver's door (left-hand drive) in the list of units the problem is that the driver's window reacts in the opposite way (if I press "up", the window goes down. if I press "down", the window goes up. I don't know where the error is. I don't have another engine to test yet. is it still possible to modify the encoding somewhere? in unit 09 for FHSG DRV, despite the original cable, I do not have a description of bytes and bits. coding is the same as another car with the original engine full scan (errors unit 17 and 5F is from another modifiing): Saturday,18,April,2020,20:32:00:21987 VCDS -- Windows Based VAG/VAS Emulator Running on Windows 10 x86 VCDS Version: 20.4.0.1 HEX-V2 CB: 0.4513.4 Data version: 20200331 DS317.0 www.Ross-Tech.com VIN: TMBJN6NJ7GZ173417 License Plate: Mileage: 98956km-61488mi Repair Order: -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- Chassis Type: NJ-SK26 (6C0) Scan: 01 03 08 09 10 15 17 19 20 44 5F VIN: TMBJN6NJ7GZ173417 Mileage: 98956km-61488miles 01-Engine -- Status: OK 0000 03-ABS Brakes -- Status: OK 0000 08-Auto HVAC -- Status: OK 0000 09-Cent. Elect. -- Status: OK 0000 10-Park/Steer Assist -- Status: OK 0000 15-Airbags -- Status: OK 0000 17-Instruments -- Status: Malfunction 0010 19-CAN Gateway -- Status: OK 0000 20-High Beam Assist. -- Status: OK 0000 44-Steering Assist -- Status: OK 0000 5F-Information Electr. -- Status: Malfunction 0010 ------------------------------------------------------------------------------- Address 01: Engine (J623-CJZD) Labels:. 04E-907-309-V1.clb Part No SW: 04E 906 027 BC HW: 04E 907 309 AF Component: R4 1.2l TFS H23 9086 Revision: R4H23--- Coding: 01190012232415080000 Shop #: WSC 65048 003 104857 ASAM Dataset: EV_ECM12TFS01104E906027BC 001009 ROD: EV_ECM12TFS01104E906027BC.rod VCID: 669446AD08E2930BC9E-8032 CAN Converter 01: No fault code found. Readiness: 0000 0000 ------------------------------------------------------------------------------- Address 03: ABS Brakes (J104) Labels:. 6R0-907-37x-ESP90.clb Part No SW: 6C0 907 379 K HW: 6R0 907 379 BA Component: ESP9.0i H03 0004 Serial number: 08514048160314 Coding: 41F5487D492A33C30918106A0058821292CC9008000DD7098F00 Shop #: WSC 13765 031 00063 ASAM Dataset: EV_Brake1ESP90iBOSCHPQ26 100020 ROD: EV_Brake1ESP90iBOSCHPQ26.rod VCID: 372ADBE91FC8DA83A28-8062 No fault code found. ------------------------------------------------------------------------------- Address 08: Auto HVAC (J301) Labels:| 6C0-820-045.clb Part No SW: 6V0 820 045 A HW: 6V0 820 045 A Component: AC Manuell H01 0202 Serial number: 1603091B-1445 Coding: 100000001000100000 Shop #: WSC 73430 031 00063 ASAM Dataset: EV_ACManueKMMValeoPQ26 002001 ROD: EV_ACManueKMMValeoPQ26_SK26.rod VCID: 3038E0F5FAA60DBBE32-8064 No fault code found. ------------------------------------------------------------------------------- Address 09: Cent. Elect. (J519) Labels:| 6C0-937-090-V1.clb Part No SW: 6C0 937 090 D HW: 6C0 937 090 Component: BCM PQ26 HiKR H10 0094 Serial number: 006318037927 Coding: 1C00095042158A7B43804000412F87080001D100D30A3500000000000000 Shop #: WSC 65048 003 104857 ASAM Dataset: EV_BCMA0 006002 ROD: EV_BCMA0_006_VW26.rod VCID: 290E0D91D97C7C7324C-807C Rain Light Recognition Sensor: Subsystem 1 - Part No SW: 5Q0 955 559 A HW: 5Q0 955 559 A Labels: 5Q0-955-547.CLB Component: RLS 037 0059 Serial number: S2Y15M09D15H00M44S58 Coding: 00185E Drivers Door Control Module: Subsystem 2 - Part No SW: 6V1 959 801 B HW: 6V1 959 801 B Component: FHSG DRV 007 0001 Serial number: 00000000000009255270 Coding: 011200 No fault code found. ------------------------------------------------------------------------------- Address 10: Park/Steer Assist (J791) Labels:| 5Q0-919-294.clb Part No SW: 5Q0 919 294 E HW: 5Q0 919 294 A Component: PARKHILFE 7K H03 0048 Revision: -------- Serial number: 39331431407392 Coding: 0031151041 Shop #: WSC 73430 790 00021 ASAM Dataset: EV_EPHVA18AU3700000 002024 ROD: EV_EPHVA18AU3700000_VW26.rod VCID: 3D26C9C13DF4F0D3784-8068 No fault code found. ------------------------------------------------------------------------------- Address 15: Airbags (J234) Labels:| 6C0-959-655.clb Part No SW: 6C0 959 655 K HW: 6C0 959 655 K Component: VW20Airbag743 002 0380 Revision: -------- Serial number: 003TJ00313GV Coding: 88CCC000000000005C5400CF000800000000 Shop #: WSC 73430 790 00063 ASAM Dataset: EV_AirbaVW20BPAVW26X 001001 ROD: EV_AirbaVW20BPAVW26X.rod VCID: 3B22C7D923E0FEE3460-806E Side Sensor Driver Front: Subsystem 1 - Part No SW: ----------- HW: 410 822 503 16 Component: SideSensor_Df 151 0800 Serial number: 3575H000E2957E71B11N Coding: 2D2D2D Side Sensor Passenger Front: Subsystem 2 - Part No SW: ----------- HW: 410 822 503 16 Component: SideSensor_Pf 151 0800 Serial number: 3585H00162957E74138J Coding: 2D2D2D Side Sensor Driver Rear: Subsystem 3 - Part No SW: ----------- HW: 442 152 103 16 Component: SideSensor_Dr 1CA 0148 Serial number: 3517A00A31F93E220223 Coding: 2D2D2D Side Sensor Passenger Rear: Subsystem 4 - Part No SW: ----------- HW: 442 152 103 16 Component: SideSensor_Pr 1CA 0148 Serial number: 3527A00B31F93E33232A Coding: 2D2D2D No fault code found. ------------------------------------------------------------------------------- Address 17: Instruments (J285) Labels:| 5G0-920-XXX-17.clb-SRI3 Part No SW: 6V0 920 740 A HW: 6V0 920 740 A Component: KOMBI 205 1420 Coding: 0BAD0900218000080108B6001C00000000000000 Shop #: WSC 65517 001 104857 ASAM Dataset: EV_DashBoardVDDMQBAB 009046 ROD: EV_DashBoardVDDMQBAB_SK25.rod VCID: 3332EFF90BB036A39E0-8066 2 Faults Found: 16777024 - Function Restricted due to Interrupted Communications U1110 00 [008] - - [BAP_BCME_0x23 keine Kommunikation] Intermittent - Confirmed - Tested Since Memory Clear Freeze Frame: Fault Status: 00000001 Fault Priority: 6 Fault Frequency: 1 Reset counter: 42 Mileage: 98482 km Date: 2020.04.14 Time: 17:56:11 16777051 - Databus U1121 00 [009] - Missing Message [TCO_01 keine Kommunikation] Confirmed - Tested Since Memory Clear Freeze Frame: Fault Status: 00000001 Fault Priority: 6 Fault Frequency: 1 Reset counter: 252 Mileage: 98405 km Date: 2020.04.12 Time: 14:24:28 ------------------------------------------------------------------------------- Address 19: CAN Gateway (J533) Labels:| 6C0-909-901-V1.clb Part No SW: 6C0 909 901 A HW: 6C0 937 090 Component: GW MQB A0 H10 0094 Revision: -------- Serial number: 006318037927 Coding: 030100042F0A640000000000000300010001000000000000000000000000 Shop #: WSC 73430 790 12345 ASAM Dataset: EV_GatewA0Lear 013020 ROD: EV_GatewA0Lear_013_SK25.rod VCID: 261406ADC862530B09E-8072 Multi Function Steering Wheel Control Module: Subsystem 1 - Part No SW: 3V0 919 719 A HW: 3V0 919 719 A Component: E221__MFL-PR6 H02 0160 Serial number: 000000000D2251200218 Battery Monitoring Control Module: Subsystem 2 - Part No SW: 6C0 915 181 A HW: 6C0 915 181 A Component: J367-BDM H08 0223 Serial number: 53079716042821739041 No fault code found. ------------------------------------------------------------------------------- Address 20: High Beam Assist. (J844) Labels:| 8S0-857-511.clb Part No SW: 3G0 857 511 AG HW: 3G0 857 511 AG Component: FLA H08 0001 Revision: AA001001 Coding: 010100E500000000000000 Shop #: WSC 12345 123 12345 ASAM Dataset: EV_HighBeamAssisAU33X 001016 ROD: EV_HighBeamAssisAU33X_VW37.rod VCID: 6D8639812D14A053884-8038 No fault code found. ------------------------------------------------------------------------------- Address 44: Steering Assist (J792) Labels:| 6Rx-909-144-V2.clb Part No SW: 6C1 909 144 AG HW: 6C1 909 144 D Component: EPS_TRW_ALow 312 3232 Serial number: CG460016 Coding: 800700 Shop #: WSC 73430 790 00063 ASAM Dataset: EV_SteerAssisUDSTRW 016026 ROD: EV_SteerAssisUDSTRW.rod VCID: 6D8639812D14A053884-8038 No fault code found. ------------------------------------------------------------------------------- Address 5F: Information Electr. (J794) Labels:* None Part No SW: 6V0 035 871 J HW: 6V0 035 871 J Component: MU-E--US 690 8740 Serial number: 24081800021394 Coding: 03620200BE0000001111000401000A00AF0003D40000010004 Shop #: WSC 73430 790 12345 ASAM Dataset: EV_MUEnt4CGen2LGE 001041 ROD: EV_MUEnt4CGen2LGE_VW32.rod VCID: 3E24CECD30F2EBCB61E-806A 3 Faults Found: 1543 - Control Module Incorrectly Coded U1014 00 [009] - - Confirmed - Tested Since Memory Clear Freeze Frame: Fault Status: 00000001 Fault Priority: 4 Fault Frequency: 1 Reset counter: 252 Mileage: 98405 km Date: 2020.04.12 Time: 14:23:53 Voltage terminal 30: 11.9 V Byte_Coding_Condition-byte_0_condition: OK Byte_Coding_Condition-byte_1_condition: OK Byte_Coding_Condition-byte_10_condition: ERROR Byte_Coding_Condition-byte_11_condition: ERROR Byte_Coding_Condition-byte_12_condition: ERROR Byte_Coding_Condition-byte_13_condition: ERROR Byte_Coding_Condition-byte_14_condition: ERROR Byte_Coding_Condition-byte_15_condition: ERROR Byte_Coding_Condition-byte_16_condition: ERROR Byte_Coding_Condition-byte_17_condition: ERROR Byte_Coding_Condition-byte_18_condition: ERROR Byte_Coding_Condition-byte_19_condition: ERROR Byte_Coding_Condition-byte_2_condition: OK Byte_Coding_Condition-byte_20_condition: ERROR Byte_Coding_Condition-byte_21_condition: ERROR Byte_Coding_Condition-byte_22_condition: ERROR Byte_Coding_Condition-byte_23_condition: ERROR Byte_Coding_Condition-byte_24_condition: ERROR Byte_Coding_Condition-byte_25_condition: ERROR Byte_Coding_Condition-byte_26_condition: ERROR Byte_Coding_Condition-byte_27_condition: ERROR Byte_Coding_Condition-byte_3_condition: OK Byte_Coding_Condition-byte_4_condition: OK Byte_Coding_Condition-byte_5_condition: OK Byte_Coding_Condition-byte_6_condition: OK Byte_Coding_Condition-byte_7_condition: OK Byte_Coding_Condition-byte_8_condition: OK Byte_Coding_Condition-byte_9_condition: OK 1564 - Microphone 1 B129B 13 [008] - Open Circuit Intermittent - Confirmed - Tested Since Memory Clear Freeze Frame: Fault Status: 00000001 Fault Priority: 4 Fault Frequency: 1 Reset counter: 44 Mileage: 98504 km Date: 2020.04.15 Time: 05:47:47 Voltage terminal 30: 11.7 V 7195 - Function Restricted due to Missing Message(s) U1111 00 [009] - - [Brake assist system (0x1B) - function restriction due to communication error - BapErr_retry not successful] Confirmed - Tested Since Memory Clear Freeze Frame: Fault Status: 00000001 Fault Priority: 6 Fault Frequency: 1 Reset counter: 252 Mileage: 98405 km Date: 2020.04.12 Time: 14:23:56 Voltage terminal 30: 11.9 V BAP-BAP_Function_ID: 00 End----------(Elapsed Time: 00:44, VBatt start/end: 12.3V/12.3V)----------- thanks for reply and sorry for my english
  12. most of them have noticed that the full LED rear lights will be used on the new facelift version. I had the opportunity to shrink the rear Full LED lights from the facelift version to ours before the facelift. my friend ordered them and had them mounted first, but without lighting. let I say that: I´m first successfully light on, mounted and coded the facelift lights ... I can prepare an article over time, this is just basic info and photos. the car is available for viewing in the east of Slovakia, in the Czech Republic is friend in Prague (but I do not know if it will be willing to show it) unwrapping / test in living room on battery / pinout: test in car - left Full LED, right without any lights -> error, check the rear lights without coding / after coding / fog / brake / backup: off / on: another friend offered himself earlier to capture better night shots, including comparison with regular lights test on silver and white car: final photos: price: about 300 - 320 € of pair exchange is not complicated. it is necessary to change the order of the pins in the connector and to encode it. the difference is in the fog lamp, the designation H21W BAY9S. directional and reverse are identical, just replace -- sorry for my terrible English. if it is my power, I will answer the questions

Important Information

Welcome to BRISKODA. Please note the following important links Terms of Use. We have a comprehensive Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Account

Navigation

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.