wirer

from my combi - 3V9 863 957

Sorry. You only need to rewrite or copy the text and Google would find the page. Second attempt? https://wirer.sk/f3_asr-esc/

https://wirer.sk/f3_asr-esc/

I had the same problem when I bought the car. Solved by replacing the mechanism. https://wirer.sk/s3_naraznik-dvierka/

I just read that I'm probably not the only one whose zero emission menu disappeared :( first I found another topic about the MIB update https://www.briskoda.net/forums/topic/524462-superb-iv-2021-infotainment-update/#findComment-5957348 Are there any ideas for a solution yet?

I also recently updated the OCU to 0143 and the MIB from 270 to 332 (gradually - 278-308-330-332). VCDS does not show any errors, but the zero emission item disappeared from the "range monitor" menu (similar to the one in the photo, I miss it). Has this happened to anyone else? or ideas on how to get it back? I compared the current adaptations of the 5F unit with the statement after buying the car and I did not find any differences... PHEV 2021

you need use google translator https://wirer.sk/f3_halogen-projektor/

6V0 035 869 H is without reversing camera support. the camera is supported from 6V0 035 869 J. he would have to buy another radio, replace it, remove the protection of the components and only then deal with the camera

if I remember correctly, it is necessary to adjust the wiring even on the facelift. it is also necessary to change the coding

I changed the steering wheel. a piece-for-piece replacement fits, but you have to buy a new airbag for the new steering wheel https://wirer.sk/o3_volant22-vymena/ in addition, switching items in the menu does not work correctly. therefore a friend suggested a simple Arduino emulator. it works reliably https://wirer.sk/o3_volant22-modul/ I also got a heated steering wheel. so it's already connected completely and the heating is also working https://wirer.sk/o3_volant22-vyhrev/ I recommend Google Chrome and automatic translation from Slovak for reading

https://wirer.sk/o3_klima-vymena-automat/

I have a scheme for TDI engines, but I secretly hope that it will be possible to connect it for TSI engines as well. In my opinion, the units for the engine will be similar, but I also looked at the Golf TSI, for example, there is no connection option there either

any news regarding PTC fitting for gasoline engines? I don't have a 1.8, but only a 1.4TSI. I know the pin sizes, I just don't know which position in the motor RJ I should connect them to. so far I have it at 90 and 47, but the diagnostics reports an error and the PTC does not start 😞

try to delete all data on your mobile via Settings - Applications - Android Auto, reset the app. clear cache and all data. don't forget to open the AndroidAuto settings on your mobile after the reset and enable the seamless connection

link found: https://www.drive2.ru/l/636054833358450990/