Everything posted by BigGibril
-
Relay fuse box diag
not the same ...in my case petrol engine not diesel and nr 8 is contact relay the 644 for me and there is a high heat output relay. its similar.
-
Relay fuse box diag
Layout of relay box for a 2014 1,2 tsi 86hp 1x644 (sqr white) 4x645 (sqr blk) 6x646 (slim) this is how i see it...the layout front view .... but all the numbers are upside down on the relays 646 645 646 646 646 645 644 645 646 646 645
-
Relay fuse box diag
hello, need a relay box diagram 1,2 tsi 2014. i have 11 relays behind the main fusebox . 1x644 4x645 6x646 i cant find this specific one online what do they do? thank you
-
AutoStart function key turn! Strange symptom
hello, the autostart got fixed after the missfire / hicaps got fixed for fabia mk 2 with stage 1 to 130 hp but for safe messure i will change the fuel pump relay/ start stop to fix hicaps/ misfire all 3 new engine mounts Spark Plug 1.4TSI RS Brisk - 4 pcs Ignition Cables 1.2TSI Tesla Kamoka ignition coil
-
Missfire and possible boost leak?
hello, fixed my missfire / hicaps for fabia mk 2 with stage 1 to 130 hp all 3 new engine mounts Spark Plug 1.4TSI RS Brisk - 4 pcs Ignition Cables 1.2TSI Tesla Kamoka ignition coil
-
AutoStart function key turn! Strange symptom
Skoda fabia 1.2 tsi 2014 86hp. new battery :)) I have the one tap key function (dont know the correct name) You throw the key in the contact and twist once and it crancks for you. Do not need to hold the key in the turn position until the car cranks. autostart function : when i do the one turn the car just cranks and cranks and dosent start. like its no spark just cranks ...But if i do a classic twist and hold the key in the crank position it will start instant like no issues Any ideeas?
-
Missfire and possible boost leak?
Got a missfire reacently. lost power. found the issue but...... i have changed the controler and the leeds. but i have not changed the spark plug because i had new installed last year. i did buy new spark plugs just in case. and the air intake seem loose in my opinion. Should i change the spark plug too? is the hose in the video loose? needs changing? a5a1f5e5-f8f7-4a04-9f4c-fbee588f5550 (2).mov
-
relay-J359 and relay -J360 Open circuit/short circuit to ground
well i'll be darn. did not notice. learn every day thank you i will come back to answer if the problem is fixed as soon as i find a mechanic to diagnose the car
-
relay-J359 and relay -J360 Open circuit/short circuit to ground
yes you are right 33 is ok, counted wrong and it dont have contacts too :)) i will come back later this week me with a update for the diagnostic the mechanic did not have time today thank you @Breezy_Pete a legend can you recomend a cheap diagnostic tool, or solution so i can do it myself?
-
relay-J359 and relay -J360 Open circuit/short circuit to ground
one more thing fuse 33 is missing to. before i go to the mechanic to check the errors again :))
-
relay-J359 and relay -J360 Open circuit/short circuit to ground
yes not super hot but worm. hot air comes in max 10 minutes. having in mind i live in sweden is 6 celsius today. hot air is most of the time on for me.
-
relay-J359 and relay -J360 Open circuit/short circuit to ground
i will add a 10a fuse there and see if that fixes the problem. i will have to go to the mechanic again because i dont have a diagnostic tool
-
relay-J359 and relay -J360 Open circuit/short circuit to ground
what fuse is missing more? i see fuse 48 is missing too :)) yes
-
relay-J359 and relay -J360 Open circuit/short circuit to ground
Funny thing is that the heating works. hot and cold is coming in. i will add a 10a fuse there and see what happens
-
relay-J359 and relay -J360 Open circuit/short circuit to ground
-
relay-J359 and relay -J360 Open circuit/short circuit to ground
fuse 29 is empty :)) because i check fuse 28 Should it be a fuse there ?
-
relay-J359 and relay -J360 Open circuit/short circuit to ground
Hello, i have been to 2 diferent mechanics and both told me to find a electician. i have 3 error faults on my car P300400 Low heat output relay-J359 Open circuit/short circuit to ground P300600 High heat output relay -J360 Open circuit/short circuit to ground 00447 upper limit exeeded function due to excesive voltage How to fix? Which is the relay that burnt out? i did check the outside fusebox all are ok. i seen the relay block behind the fusebox ....that will be a pain to access . skoda fabia mk2 2014 1.2tsi left hand drive Thank you
-
Only one fog light working
hello, funny thing i have a friend and he was quite "smart" (he is a bartender) he ask me if i did like his internet provider says: " did you unplug the modem for 3min?" i pull out the minus on the batery for 10 min . magic warning light reset worked i think the circut went in protection after the cheap LED burnt itself just needed a reset. thank you for your time super much apreciated all great ideas happen at the pub :)) ha ha yes found out later that is DRL. its fuse 17 ( DRL with the start stop function one fuse )
-
Only one fog light working
UP! any ideeas any one?
-
Swing Radio Bluetooth Upgrade Help
hello, did you try this or similar? i have it it is ok but i took a direct wire to stereo. the radio sound signal is not magic, https://lysiq.se/usams-fm-sandare-med-bluetooth-usb/
-
Front door rain on lower door seal (Cill area)
it rains in between the glass and door. some glue and a strip behind the speaker on the top side to water proof it f95becfa-92f3-482b-b0ac-8dbb6f9b5d9d.mp4
-
Only one fog light working
hello, i have a skoda fabia mk 2 ( with a fabia mk3 ecu.) i have the facelilt one. i have the left fog light getting 1.78v and its no light on. fuse is good on all lights. reacently i was testing some temu led to see the quality :)) and same day went to get a stage 1 but the tuner downgraded my ecu by 2 updates lower and he said he will go thru the file to see what we can do for my car. that is when i see both led (left/right) are off. change to normal bulb and only left side is dead take the multi meter and check wires only 1.78v. any ideea what has happend? thank you and sorry for the long boring message