lil_azza

Sorry its 312mm

Im looking for buying discs and pads to go with my leon calipers will bora v5 pads and discs work? Or am i looking at 2wd cars only? Ebay no, 280114091458

You can still get the hammerite light green spray bud

Not sure 15s will phisicaly fit over calipers on vrs plus going down a size youd have to have a larger tyres to compensate to keep speedo accurate

Having drove quite a few for various reasons i wouldnt say there worth the extra money over standard seats plus being leather ul move in them alot more than cloth, unless ur properly harnessed

If its the ignition coil u wont need to know what one is cylinder etc the coil is the part all the leads go into, change like for like, iirc its 3 torque bolts and a plug simple and easy t do bud

If u dont mind me asking how much did it cost u for a rebuild? Cheers

Wishbone bush

I personaly wouldnt, end of the day its a safety matter, 22quid or potentionally a 1 1/2 tonn bullet that wont stop hope u get it sorted bud

Basicaly would a vrs dmf fit a 2000 bora tdi 110 6 speed?

Been told its 99percent the drive bearing, but when this goes its highly likely that its wrecked the rear case so different gearbox is required,

R32 reps are 18s right?

I can get a second hand box with 60day warranty for 300 same code as mine, hes told me that its common bearing to go and worst case it will wreck rear case making it about 1100quid but without taking box apart he wont know for sure, if it is wrecked im screwed as i dnt have 1100 to repair, so car is usless untill i get said 300 box delivered

Right been to a gearbox specialist, its confirmed my box is on its way out not dmf My car is a 55vrs so without looking wouldnt it be a HDS? Am i right in understanding that all boxes in the same group are the same just from different cars and years? Should i be looking at getting a box from same group or go for a FSM,FJW? As the ratios look better? Sorry for all the questions, cheers

Got a pink and blue left?

Thers somone on here whos done a "pikey arch mod" with a vent might cone up on search bud

Type mufflerectomy into youtube see if its noise u want

I know its not quite what your after but i stumbled across theses last night bottom of the page some has asked for fabia ones and there same price http://www.superskoda.com/skoda/octavia-ii/oem-seat-covers-rs-design-red-01

Have you tryed disconnecting the battery for a hour or so?

Ok kool sounds safe cheers

Sorry t hijack but what can a standard pd130 take?

Yea iv read that too, as my dmf on its way out im thinking smf so if i go to 300 ish i shouldnt come across any other problems should i?

Yea hes very well though of in mapping rovers etc and t4s so sounds good to me he reckons up to 170 and just under 300ft to keep clutch safe, as im thinking about smf i should be fine fingerscrossed

Been emailing a local company in my town that does custom remaps for 200 pound it sound awefuly cheap but is a proper company if i was to get this map what sort of power should i ask for? Its totaly standard atm, probably fitting a smf as my dmf is gone cheers

Bought some dropped spindles from the states priced marked at 86usd had to pay 23 import duties, still worked out 57pounds cheaper than uk