Azzy12

Tried the item number in eBay, its the toyosport Octavia vrs Fmic. I have this fitted on mine, no extra pipes needed, good kit, however make sure that the pipes are connected securely as they tend to pop off under full boost. :-)

bump

Thanks and for the replies and pics, all fixed now :-D

Today I took apart the doorcard on the drivers side, and the door membrane had a lot of cuts in it and was taped with masking tape. I took this off and replaced with bin liner and loads of insulation tape as a temp measure, however refitting everything, now the indoor handle does not open the driver door.. :-( The cable hasn't snapped and is hooked on behind the handle, so what could be the issue..?

I have this problem on my Vrs. I took apart the doorcard on the drivers side, and the door membrane had a lot of cuts in it and was taped with masking tape. I took this off and replaced with bin liner and loads of insulation tape as a temp measure, however refitting everything, now the indoor handle does not open the driver door.. :-( The cable hasn't snapped and is hooked on behind the handle, so what could be the issue..?

Bump

Updated with project thread link :-)

??

2001 Y reg Rally Red Octavia Vrs I am the second owner, however the car has only had one owner from new, who first had it logged under his company and then passed down to his son, so on the logbook I am the third owner, however in reality the car has only been in one family. 146000miles Tax til Dec 2014 MOT til April 2015 FSH Loads of paperwork and receipts New clutch and flywheel less than 10,000miles ago Cambelt not due for another 30,000miles atleast 2x Flip keys 4x electric windows Electric mirrors C/L Mods: Rtech stage 2 remap; 240hp/270tq Launch control FMIC DECAT Rtech TIP S2000 Air filter SAI, N249 etc delete and error codes mapped out Lowered on FK coilovers 17" vrs alloys in gloss black Cupra R lip Boost gauge Custom white LED dials and switches 6000k HIDs Golf recaro bucket seats, red and black Armrest OEM Xenon headlights Have black carpet that needs fitting All in all a good car with no mechanical issues, bodywork has a few dents and scratches as expected. Front bumper in poor condition, drivers door has a small patch of rust on the bottom right corner and spoiler and bonnet slightly faded paintwork Px: Looking for a diesel, MG ZT CDTI, Golf TDI, 307 HDI XSI etc. http://www.briskoda.net/forums/topic/302425-mk1-octavia-vrs-stage2/#entry3610310 Project thread link Price, £1500ono without the OEM Xenons,but a firm £1600 inc the OEM Xenons. Pictures are in my project thread. PM me :-)

LCR splitter?

+1 I had my stage2 done at Rtech, 240hp, 270lb tq, that's with a weak actuator and some timing issues with the engine. The way it pulls is amazing :-)

Stage 1 to stage 2 is night and day :-)

Id rather not flat shift tbh as it seems it won't be very healthy on clutch and engine if I don't have it lol I'm more than happy finding out I have launch control lol

Intercooler pipe beader for sale. Can be found on eBay if you type in: pipe beader in the search bar. Collection preferred. £60. :-)

I don't plan to use LC often, just cool to know i have this feature lol And what's this rapid shot rev limiter thingy??lol

Well I've tried it in 1st gear and it seems I have launch control.. Lol :-)

Hmm, ill try it tonight in 1st gear, but i asked Rtech about launch control and i was told uprated internals are needed...

Thanks for the replies. Yes Rtech has remapped it,stage2. Could it be tthe map? PS, I haven't revved it in gear when stationary, only in neutral..

As per title. I've read it could be the MAF, however I changed my MAF (as my maf was goosed), for a second hand one and no codes have come up since. What other reasons could cause this?:-)

Ps I'm located in Birmingham and the garage I use can fit your fmic and bead it also with the kit I bought :-)

I bought the toyosport kit that's named under the Octavia vrs kit. Under stage 1 the pipes still popped off. That link on eBay to that beading kit, I bought that, got delivered today, looks very good. Getting pipes beaded on Tuesday :-)

I have the same kit. The ends of the pipes are not beaded, therefore under full boost my intercooler pipes pop off, my car is on a stage 2. So before fitting I would advise to get the ends beaded :-)

Okie dokie, just placed an order, thanks for the link, you're a life saver :-)

Thanks for the replies. Just had a look at the beader, looks really good. How much did you pay for it? And are there any issues if the intercooler pipes have bends in them?

??