Skip to content

Methanol results

Featured Replies

Went jabba on friday and found that a 25% mix of methanol gave me a extra 13bhp.

Uped it to 35% mix and got 235bhp and I then asked him to mess around and he gave me 237ponies.

He said I would see 240bhp with a 50/50 mix :D

Not bad out of a furball

that is surprising but very good m8

i only got 8bhp :( with 50/50

  • Author

I'm running duel nozzles with a D01 and D03 jet. Meaning 1 and 3 gallon per hour. At first it was quenching and I was down big time on torque but he sorted that out by only injecting after 2600rpm. I'll try and put my graph up soon

nice 1 m8 thanx

did you get kev to fit it?-Snow Performance Stage 2 Diesel Boost

im going down for my final custom remap at the end of the month,would be nice for the extra bhp lol

  • Author

No I've got the devils own kit

Top work! So did need a little fine tuning then! Still awesome to gain even 13bhp from a 25% mix! What bhp did you start with before the meth then? (already asked this next one but will again!) and how smokey was it without meth? and now with the meth on? Thought the idea of the dual nozzle was to help low down grunt, if you have the graphs post them man im going crazy here :D

Interesting. I think on my setup, it uses too much so I am going to set it to only starting injecting at around 1 bar of boost. :) At the moment it cuts in at about 0.7 which is a bit low. Having the progressive injection usually helps to avoid any quenching when it starts first time. :)

dont you want rapid cooling tho? or am I missing something Jas?

  • Author

Well the charge temps initially dont need cooling, so you can hold out a biton the injection. I need a scanner to put my graphs up so you can see.

Started at 220bhp and smoke was ok. Then added the mix and according to michael at jabba the levels were good lol. Got a few vids on the rollers but will get them up soon

Nice one fella :D

  • Author

Will put links up in a second. The dyno room at jabba is fairly dark so not the best vids but you can still see the smoke levels

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Important Information

Welcome to BRISKODA. Please note the following important links Terms of Use. We have a comprehensive Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Account

Navigation

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.