Hi,

There's a little flat rectangular bit of plastic which inserts into each of the spray nozzles at the bottom of the windscreen. The car I just bought has one of them missing and what happens is that far too much spray liquid comes out of the one with the missing insert (empties bottle rather quickly), and the other one which has the correct insert hardly sprays at all because there's not enough pressure.

Does anyone know where to buy this bit of plastic?

Dave

Dealer mate, is a few posts on here about them... you'll be looking at less than £5 and about 10 minutes of your time to push the jets onto the tubes (is apparently a bit fiddly?)

Not done it myself, but I remember reading!

Dealer mate, is a few posts on here about them... you'll be looking at less than £5 and about 10 minutes of your time to push the jets onto the tubes (is apparently a bit fiddly?)

Not done it myself, but I remember reading!

Thanks Cheesey. Sounds like maybe you can't get the insert on its own then? I don't think I need a whole jet..

Yeah you can just get the top nozzle bits to stick on, should be a rather easy job Just had a quick search through and someone mentioned something about £3 and 20 seconds to fit

Edited 13 December, 200916 yr by Confused_Cheese

P/N 3B0955985

Though double check first, But it should be right!