Quick DV fitting question

[Choongmu]

HI,

Just got a used Forge 007 DV. Am i right in thinking that on my standard Vrs i need a green spring for it? If so does anyone want/need/fancy a swap with a blue one!!!

Also i know i'll need 2 new ring clip type things to fit, but do you just use a cable tie on the small pipe from the top? Any other useful fitting tips would be gratefully received.

Thanks in advance

[Mr Mul]

May find this helpful

http://www.forgemotorsport.co.uk/content.asp?cat=0007&inc=product&product=FMDVSU110

[Choongmu]

May find this helpful

http://www.forgemotorsport.co.uk/content.asp?cat=0007&inc=product&product=FMDVSU110

Was the first place i looked. If i knew what pressure the turbo was putting out as standard i wouldnt be asking the first part of the question.

[karlbar2k]

a cable tie on the small vac line is usually OK and you will need either a green or yellow spring.

Edit: Green for standard and some remaps, yellow for remap

Edited 17 February, 2010 by karlbar2k

[Choongmu]

a cable tie on the small vac line is usually OK and you will need either a green or yellow spring.

Edit: Green for standard and some remaps, yellow for remap

Many thanks for that, best get a green spring ordered.

If anyone has a green spring for one that they dont need please let me know, especially if you want to swap it for a blue one!

[chicken_eyebrow]

If i knew what pressure the turbo was putting out as standard

Unless you've got a remap it should be putting out around 10psi, or 0.7 bar

[Jigger72]

What's the blue spring for? Is it for stooopid high psi?