please bare with me as i am not very experienced in car maintenance so i really need good solid advise.i need to change the arb bushes and from research i know i need 17mm and get rid of the plastic sleeve but firstly do i need to buy powerflex or other polyurethene bush or is normal rubber ones from TPS good enough.secondly will i want to use a new bracket and does that stop the bush moving on the bar or do i need to use a jubilee clip to stop it moving as i read it on another post but im not to clear on where the clip needs to go if it needs one and is copper paste the best lube for them. lastly i saw a guide on here which was upgraded from the vw one and was made by a briskoda member but for the life of me i cant find it again so if anyone has the link to it i would be very grateful and i am grateful for any help anyone can offer.thanks.....p.s. i am going to have a crack at changing them myself.

http://cgi.ebay.co.uk/Skoda-Octavia-Anti-Roll-Bar-Bush-and-Bracket-ALL-SIZES-/400065164628?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item5d25bdf554

1J0 411314S (17mm Hole) (OAR) 19mm BAR x 2