ive searched everywhere to try and find the answer to this, but cant seem to get a definite thumbs up, im about to order a new set of wheels ready for the summer [providing we get 1] ill cut to the chase i need an extra 16mm of inner clearance [according to the offset calculator] for them to fit without spacers , ive found that the tt comps etc sit an extra 10mm closer on the inside so i only need an extra 6mm from there....im getting stressed now

any info appreciated cheers

no takers ?

Sorry mate but I don't really understand what you are asking? If you could state the offset and width of the wheels you are after then people might be able to help you easier.

Sorry mate but I don't really understand what you are asking? If you could state the offset and width of the wheels you are after then people might be able to help you easier.

cheers mate, et32 8''wide , if you type in 6.5'' et35 [std oe vrs rims] and 8'' et32 [the rims im looking at] it shows 16mm less clearance on the inside and extends outwards 33mm [according to - http://www.1010tires.com/wheeloffsetcalculator.asp] im wondering if it may catch on the inside

Are they tt comps?

Matt

If its TT comps there are a lot of people who run them and I've not heard of any issues. I think you should be fine, Maybe make sure you run 205 tyres to be sure.

no there not vag rims ,doesnt matter cant see anyone really knowing without fitting em, ill keep searching, p.s the TT comps are 7.5'' wide and fit fine i believe btw

cheers anyway

mark