Wondering how easy/complicated it is to swap the interiors, namely the seats and dash from my old tinworm-infested felly estate into the new more solid fav estate?

I understand the dash is a straight swap - the instruments a little more awkward with some wiring alterations?

Hoping the seats are a straight swap - any mods needed?

I assume the door cards are different altogether?

Any advice gladly appreciated

AFAIK the early Fel was a favcrit, pretty much, so the door cards may well go. Floor certainly looked very similar, so the seats could do too. Easy enough to give it a try - about 10 bolts for the seats in total.... You may need to swap seat belts over though on the front seats depending on their age.

I believe all the mounting points for the dash and seats are the same. It is possible the door cards are different though. But I'd be tempted to give it a go regardless if I had all the bits to hand.

Edited 2 March, 201115 yr by anewman

front seats dont bolt straight in I tried to fit fav glxi seats into my L&K as they are more supportive. the felly runners are wider apart, pretty sure the felly door trims will fit if its a mk2 fav.

DJ , not quite the same floor pan the front x-member mounts up totally different and the floor is much stronger on the felly :moon:

fav carpet also does not fit properly into a felly (but good enough for a road rally car lol)

oh and if you take a felly dash apart you will find a fav lower dash under it lol

Edited 2 March, 201115 yr by felicia16v