Must be capable of withstanding motorway speeds

Must be removable when you come to sell the car

What do you use to stick on and leave no mark once off in the future?

Any links to products appreciated

Edited 25 March, 201115 yr by fabia55

Must be capable of withstanding motorway speeds

Must be removable when you come to sell the car

What do you use to stick on and leave no mark once off in the future?

Any links to products appreciated

Your search is over :yes:

I used this recently to fit mine. http://cgi.ebay.co.uk/DOUBLE-SIDED-VHB-GEL-TAPE-12mm-x-5mtr-STRONG-ADHESIVE-/170483708016?pt=UK_Crafts_Cardmaking_Scrapbooking_Glue_Tape_EH&hash=item27b19ef070

I too didn't want to permanently fix them to my car either.

I recommend both the product and the seller.

Also the adhesive supplied with my eyebrows was well out of date.

Mine have withstood 3 figure speeds so I think you'll be okay

When time comes to take them off I will use some

fishing line to get under the tape and remove them.

And with the bonnet down it's unlikely anybody could nick them without

ruining them or breaking them

I used two full length strips on each one.

Being a clear tape its PERFECT for this particular job.

Look in here for pics. http://briskoda.net:80/forums/topic/191833-eyebrow-spoilers-fitted-splitter-tomorrow/page__p__2287101__fromsearch__1

Many thanks. I'll order some.

Not too sure how to remove them with fishing line tho

Just hook it under the eyebrow at the thinner end and using a sawing motion

work the line between eyebrow and light casing. A hair dryer would probably help to

warm the area and soften the tape. You'll see when it arrives, but it's kinda gooey

and rubbery in a "setting mastic" sort of way , Quite stretchy too.

With some heat it would peel off again easily I reckon.

good stuff, have u tried removing the goo (or whateer it is)