As above, just wanted to double make sure that this will fit my 2003 vRS

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=190523101799&ssPageName=STRK:MESELX:IT#ht_570wt_1139

Cheers

It should do, but itll need some work to attach to the existing exhaust.

How will you pass the MOT?

Looks like it will from picture of it,

If you don't want it ill have it as looks like bloke only lives round corner from me

.......by putting the CAT on for the test

I think youll have to get the welder out again to do that as theres no flange on it

these are about 100ish new on ebay, chinese downpipe/decats, thats a lot of ****ing around if you have a stock exhaust and come mot time too....

what kind of messing around?

what kind of messing around?

The messing around is taking it off for MOT and fitting a Cat downpipe on then refitting the decat back on after MOT. Well as i am tight i won't pay someone to do it, so lying on my back replacing it i got fed up.

Those Decats will fit to std exhaust with a reducer pipe so you should not need to mess up the std cat back system should you want to put std downpipe back on. That's what I used on mine. Easier option to get a good MOT station to pass it with decat. not many around though these days.

does it need sleeving?

cheers Bowders!

does it need sleeving?

cheers Bowders!

That decat looks like you might get away without sleeving as it looks like it would fit into the std centre section. The one piece decats (the one i had) does need sleeving which i why is mentioned the reducer pipe.

cheers again Bowders!