Basically, when i press the clutch in there is no noise or vibrations. But when i let go of the clutch i have a slight rumbling noise coming from the engine bay area, then when i press the clutch in it goes away.

Does this sound like the DMF starting to go?

any help appreciated as always

Cheers

Dan

could be the release bearing making a bit of noise.......if its worrying you then drop in at a local garage, will put your mind at rest

Edited 5 December, 201114 yr by tonytone

May or may not be, dmf fail is often rattly chatter at idle with foot off the clutch and a few other symptoms when it really starts to go!

As said above just pop it into the garage to check

Cheers chaps will do

Mine does this when cold but goes away after a few miles, I'm pretty certain in the release bearing

Sounds like dmf on its way out

Sounds like dmf on its way out

If it was the flywheel I don't see why it wouldn't do it all the time? Plus after its warm it goes

Referring to OP

Ok cool lol mine doesn't do it when the clutch is out or

i best get saving then lol

Just drive it with a little consideration mate (Not that you don't already)... No full on hoofing it in 5th or 6th from low revs.

Just drive it with a little consideration mate (Not that you don't already)... No full on hoofing it in 5th or 6th from low revs.

Cheers mate will do