Had a brainwave, which is rare. While i was installing this in the door using the white/yellow & black/yellow wires i got the car locking using the unlock button.

The way i wired it was the way suggested on many threads ive read on the octavia & mk4 golf. However, the white wire on my kit which rwbaldwin said is used for lock... I had going to earth! The other black/white wire in my kit went to one of the wires on the car. I shall attack it again after work

Anyone no which wire functions the full closure on the octy? My kit has the function & so does my car. If my brain wave works then i might aswell do the whole thing while im at it

Half working. Its wired back into the door. It locks with lock button but no joy with the unlock :/ i hear talk of resistors etc...?

It WORKS!!! Woo

Well Done!!!

Can i possibly ask a favour?

Did you manage to connect for full closure? If so, where,and what colour wires? Same again for the indicators please.

Thanks in advance

Hi, i couldnt find any definate suggestions for the full closure.. sorry. i will just use the key in the door for that myself tho.

the indicators i connected to the hazard light switch as suggested on a guide for the mk4 golf. i had to extend the wires on my kit to reach. they connect up to the two thickest wires on the back of the hazard light switch.