61 plate Octavia - Columbus Coding - any thoughts

[Jonny5ive]

Met up with SteelGoon last week to enable the columbus directions in his Maxidot.

He had already had the Columbus unit retrofitted and coded to work and just needed the Maxidot display enabling.

Ran a scan before any coding as always throwing the faults below:-

Wednesday,31,October,2012,12:49:17:26358

VCDS Version: Release 11.11.4

Data version: 20120807

--------------------------------------------------------------------------------

--------------------------------------------------------------------------------

Chassis Type: 7N0

Scan: 01 03 08 09 10 15 16 17 19 25 37 42 44 46 52 56 62 72 77 A6

VIN: TMBEH************

01-Engine -- Status: OK 0000

03-ABS Brakes -- Status: OK 0000

04-Steering Angle -- Status: OK 0000

08-Auto HVAC -- Status: OK 0000

09-Cent. Elect. -- Status: OK 0000

10-Park/Steer Assist -- Status: OK 0000

15-Airbags -- Status: OK 0000

16-Steering wheel -- Status: OK 0000

17-Instruments -- Status: OK 0000

19-CAN Gateway -- Status: Malfunction 0010

25-Immobilizer -- Status: OK 0000

37-Navigation -- Status: Malfunction 0010

42-Door Elect, Driver -- Status: OK 0000

44-Steering Assist -- Status: OK 0000

46-Central Conv. -- Status: OK 0000

52-Door Elect, Pass. -- Status: OK 0000

56-Radio -- Status: Malfunction 0010

62-Door, Rear Left -- Status: OK 0000

72-Door, Rear Right -- Status: OK 0000

77-Telephone -- Status: Malfunction 0010

A6-Microphone -- Status: Cannot be reached 1100

-------------------------------------------------------------------------------

Address 19: CAN Gateway (J533) Labels: 7N0-907-530-V2.clb

Part No SW: 7N0 907 530 H HW: 1K0 907 951

Component: J533 Gateway H42 1620

Revision: H42 Serial number: 270911F1003654

Coding: 351303

Shop #: WSC 73430 790 00083

VCID: 356A31F79C2780B0C23

1 Fault Found:

03753 - Control Module for Microphone

004 - No Signal/Communication

Freeze Frame:

Fault Status: 01100100

Fault Priority: 2

Fault Frequency: 1

Reset counter: 208

Mileage: 29411 km

Time Indication: 0

Date: 2011.14.01

Time: 15:54:58

-------------------------------------------------------------------------------

Address 37: Navigation (J0506) Labels: 1T0-035-680.clb

Part No SW: 3T0 035 680 B HW: 3T0 035 680

Component: RNS-MID H11 3984

Revision: AB001001 Serial number: SKZ6Z7J8085121

Coding: 00000402000000200000

Shop #: WSC 12345 123 12345

ASAM Dataset: ------------------------- ------

VCID: 2F66039F7E7BBA6088F

1 Fault Found:

01523 - Microphone for Telephone (R38)

011 - Open Circuit - Intermittent

Freeze Frame:

Fault Status: 00101011

Fault Priority: 5

Fault Frequency: 141

Reset counter: 47

Mileage: 29411 km

Time Indication: 0

Date: 2011.14.01

Time: 15:55:05

-------------------------------------------------------------------------------

Address 56: Radio (J0506) Labels: 1T0-035-680.clb

Part No SW: 3T0 035 680 B HW: 3T0 035 680

Component: RNS-MID H11 3984

Revision: AB001001 Serial number: SKZ6Z7J8085121

Coding: 00000402000000200000

Shop #: WSC 12345 123 12345

ASAM Dataset: ------------------------- ------

VCID: 2F66039F7E7BBA6088F

1 Fault Found:

01523 - Microphone for Telephone (R38)

011 - Open Circuit - Intermittent

Freeze Frame:

Fault Status: 00101011

Fault Priority: 5

Fault Frequency: 141

Reset counter: 47

Mileage: 29411 km

Time Indication: 0

Date: 2011.14.01

Time: 15:55:05

Address 77: Telephone (J412) Labels: 7P6-035-730.clb

Part No SW: 5K0 035 730 F HW: 5K0 035 730 F

Component: TELEFON H09 2902

Revision: 1B001001 Serial number: 00007662298612

Coding: 0A00000000000001

Shop #: WSC 00000 000 00000

ASAM Dataset: EV_UHVNA A01719

ROD: EV_UHVNA_SK35.rod

VCID: 2854E8835395ED58495

4 Faults Found:

9458195 - Control Module for Cellular Telephone

B1052 13 [009] - Open Circuit

Confirmed - Tested Since Memory Clear

Freeze Frame:

Fault Status: 00000001

Fault Priority: 4

Fault Frequency: 1

Reset counter: 208

Mileage: 29411 km

Date: 2011.14.01

Time: 15:55:02

13636352 - Control Module Not Coded

U1013 00 [009] - -

Confirmed - Tested Since Memory Clear

Freeze Frame:

Fault Status: 00000001

Fault Priority: 4

Fault Frequency: 1

Reset counter: 208

Mileage: 29411 km

Date: 2011.14.01

Time: 15:55:04

9457939 - Telephone baseplate

B1051 13 [009] - Open Circuit

Confirmed - Tested Since Memory Clear

Freeze Frame:

Fault Status: 00000001

Fault Priority: 4

Fault Frequency: 1

Reset counter: 208

Mileage: 29411 km

Date: 2011.14.01

Time: 15:55:02

9458453 - Cellular Antenna

B1053 15 [009] - Open or Short to Plus

Confirmed - Tested Since Memory Clear

Freeze Frame:

Fault Status: 00000001

Fault Priority: 4

Fault Frequency: 1

Reset counter: 208

Mileage: 29411 km

Date: 2011.14.01

Time: 15:55:02

End ---------------------------------------------------------------------

Left the codes in-situ - did not clear them down and proceeded to look into enabling the maxidot display.

In through main screen

Into Can Gateway

Into Coding

thought it a bit strange that the 'long code' was not that long ??

Long coding helper

Only 3 BYTES displayed and a message in red at the bottom. I'm sure there should have been more bytes in here with the usual 'tick boxes' meaning that the coding could be altered to enable the maxidot to display directions from Columbus.

Any suggestions? My limites knowledge suggests a faulty or incorrect CAN gateway??

[Gizmo]

FWIW on a 60 plate vRS the CAN coding is the same as above (351303) with just 3 Bytes, with no DTC’s showing.

But on a 59 plate vRS there are 10 Bytes.

[Hedge]

To enable the Columbus in the Maxidot don't you just tick the box for BAP protocol in either the Radio or Navigation sections. :S

[Jonny5ive]

To enable the Columbus in the Maxidot don't you just tick the box for BAP protocol in either the Radio or Navigation sections. :S

From memory (didn't screen dump) I couldn't access those control modules. I had read that the above was what needed doing. SteelGoon is local so will have another go soon enough.

[Hedge]

37 or 56 in your list above.

The reason your CAN gateway coding is so short is that most of it has been shifted to Cent Elec.

You're not using some cheap-assed cloned cable are you?

[Jonny5ive]

You're not using some cheap-assed cloned cable are you?

Yeah. One of those cheap ass £200 plus ones from a group buy on here

[Hedge]

Yeah. One of those cheap ass £200 plus ones from a group buy on here

[Eddie-NL]

37 or 56 in your list above.

The reason your CAN gateway coding is so short is that most of it has been shifted to Cent Elec.

You're not using some cheap-assed cloned cable are you?

long coding is short because you now use the Installation list in the CAN gateway.

To the OP

untick Microphone from the installation list in the gateway as you don't have that type. Faults in the telephone module can be coded out

[Jonny5ive]

long coding is short because you now use the Installation list in the CAN gateway.

Noticed this pop up and had not seen it before. Thanks for the info