After all your help from helping me choose between 18' chrome rims or FMIC i've choosen FMIC it goes in next week to be measured custom built and installed this includes them tweeking my boost and ignition timing all for a little over

After all your help from helping me choose between 18' chrome rims or FMIC i've choosen FMIC it goes in next week to be measured custom built and installed this includes them tweeking my boost and ignition timing all for a little over

Figures are not the be all and end all

I run about 250bhp

Is that from Jabba's RR or have you seen that figure on others as well?

Seems a little high to me though I am assuming you still have a K03s?

what figures is yours running with the custom JBS mapping now Gary? IIRC you saw quite impressive figures at the RR day they had that i went to. you hadnt got the custom map then.

About 250 here as well

what figures is yours running with the custom JBS mapping now Gary? IIRC you saw quite impressive figures at the RR day they had that i went to. you hadnt got the custom map then.

On the Briskoda day with Revo 4bar set up perfectly after hours and hours of logging and changes with SPS3 I got 228.6bhp and 257.9lbft.

I then had Custom Code Phase 1 and got 232.9bhp and 256.5lbft but the torque curve was much flatter meaning I had more torque before and after the peak figure than I did with revo.

Custom Code Phase 2 has given me 239.2bhp and 279lbft and this is wringing the neck out of the K03sport and a very nice timing map which is why I doubt figures of 250bhp coming from a K03sport equiped 1.8T though Im sure that figure wouldnt be seen on JBS' rollers.