Right guys,I'm off to Birmingham in a bit to pick up a LCR front end which I'm getting for a bargain price!

Does anyone have the correct part numbers so I can check them against these bits to make sure I'm not getting pumped!

Cheers

Captain slow!

Theres lots of variations mate

Check its cast withbones n hubs and its a good start

But for what ur paying its worth a punt even if not

The wishbones themselves should be: 8N0 407 165 (passenger side) & 8N0 407 166 (driver side)

They're the easy bits to identify though

Thanks mate,it's more the hubs I'm worried about!

The rack is still on the car so not to bothered about that either tbh!

There are some good pics of the hubs on this thread: whats-the-benefit-of-fitting-cupra-r-wishbones-hubs-etc

Thee should be a lower brace bar fitted. And the big subframe bushes will be the more solid aluminium? Ones...

So the TT lcr subframe itself is different to is it ?

Got em...LCR front end incl:-

Hubs with bearings and abs rings!

Wishbones with lots of oil on them!

Subframe with lots of dirt on it!

Steering rack with track rods and ends!

All for the bargain price of........£100!

Its all getting pulled apart tmrw for acid dipping and powder coating ;-)

Thats a freaking bargin

Did they fall off back of a wagon for that price

They fell off a Leon!

He's legit guys,got the Leon shell on his drive with a cover over it!

To say I'm stoked is an understatement! :-)

Would my vrs polybushes for the subframe and wishbones fit the TT/LCR setup by any chance???

I also know a guy breaking a lcr if anyone interested. I just had his fuel pump and will be taking injectors.

Sent from my Samsung S3

No mate different bushes in the cast arms

Just asked billy the same thing

We needs these

http://www.candrenterprises.co.uk/shop/superpro-uprated-suspension-bushes-audi-tt-coupe-8n-4wd-1999-2006-5.html

But rob can get them

I thought they were different.....

Maybe we could have a mini mini group buy,just us two???

( of to rob i go )

I'll be speaking with him tomoro mate

No mate different bushes in the cast arms

 

Technically not true buddy for poly bushes 

 

They are all the same.(if you don't want castor increase)

 

The OEM std bush for LCR is same as a Audi TT (solid) as apposed to the voided bush in the VRS, but in terms of dimensions the LCR/TT solid bush is a great upgrade to the VRS wishbone. 

 

But for your LCR arm your poly bushes are ok  as the none OEM poly bush is already a upgrade so they are all solid and the same for each VAG car with the Mk4 Golf Platform

 

Mind you if you are going for better handling with LCR i would fit the castor angle bushes personally.(which is what Billy listed)

 

SPF3397K

 

http://www.superpro.eu.com/catalogue/cataloguedisplay.aspx?MenuID=132#SPF3397K

 

or buy the full front kit that has the Font wishbone bush  as well.

 

KIT5240CAK

 

http://www.superpro.eu.com/catalogue/cataloguedisplay.aspx?MenuID=132&KitNumber=KIT5240CAK&KitTitle=Front-Control-Arm-Bush-Kit

Whats kit5240CIDJK i thought that was the kit ?

The kit with both but caster isnt it ?

Was worried then

Like noooooo a wrong part number in my build table lol

Whats kit5240CIDJK i thought that was the kit ?

The kit with both but caster isnt it ?

 

Yes it is dude  so don't panic

I was referring to your comment to vrsmark as he has poly bushes that he could,  if he wanted use in his LCR wishbones with no issue what so ever.

Ah lol

Im sorting mark...... Well via rob

What mark said its all interchangable but the castor bushes need the cast wishbones. Thats all

Thanks for the help guys,much appreciated!

I'm just wondering about the bushes in case my std front end doesn't sell I can rob the bushes off that to save a few quid!

But like you say,it's best to do the castor bushes if I'm gonna mess around taking it all off again.....

Once bushes are in mate thats it. You wont get them out in one piece mate.

If your strapped for cash get std ones. Its still a brill setup with them mate.