16490 -manifold\barometric pressure sensor (G71)(f96) p0106-35-00 implausible signal

[MohamedKaram]

You need to set the engine at TDC on cylinder number 1 before checking the timing.

haw cane i  set engine at TDC ?

and whay u say set engine at Tdc Before Checking The Timing ?

and cane u give me timig place fabia 1200 3 clinder

 

....

Edited 26 December, 2013 by MohamedKaram

[sepulchrave]

haw cane i  set engine at TDC ?

and whay u say set engine at Tdc Before Checking The Timing ?

and cane u give me timig place fabia 1200 3 clinder

 

....

 

You can check TDC by removing number 1 spark plug and using a long screwdriver to check when the piston is at the top and see that the slots in the cams are in line.

 

If there is a timing problem then you will have to take the car to a specialist because you will not be able to repair it yourself.

[MohamedKaram]

i do that  asrewdrive 2 piston at the top and one piston in the deep

i  chevked 3 piston - 2 in top one is done in the deep

the write 3 pistone in top or wate?????????

 

You can check TDC by removing number 1 spark plug and using a long screwdriver to check when the piston is at the top and see that the slots in the cams are in line.

 

If there is a timing problem then you will have to take the car to a specialist because you will not be able to repair it yourself.

i do that  asrewdrive 2 piston at the top and one piston in the deep

i  chevked 3 piston - 2 in top  1 is done in the deep

see this pic

untitled.bmp

Edited 26 December, 2013 by MohamedKaram

[mogwye]

Putting it simply.

 

Take out Spark Plug number 1, next to the Timing Belt, put the screwdriver in spark plug Number 1 hole, turn the engine slowly by hand until the Piston is EXACTLY at the TOP of the stroke, indicated by the feel of the screwdriver.

 

Now take your pictures.

 

DB

Edited 26 December, 2013 by mogwye

[MohamedKaram]

Putting it simply.

 

Take out Spark Plug number 1, next to the Timing Belt, put the screwdriver in spark plug Number 1 hole, turn the engine slowly by hand until the Piston is EXACTLY at the TOP of the stroke, indicated by the feel of the screwdriver.

 

Now take your pictures.

 

DB

thank u for healp  after make this chiking timing like pic ?

Edited 28 December, 2013 by MohamedKaram

[MohamedKaram]

ISNP

WAT MEAN THIS MSG IN DASH

I CANT ERSE IT

AFTER THIS MY CARE GIVE THIS ERRO

16490 -manifold\barometric pressure sensor (G71)(f96) p0106-35-00 implausible signal

AND I CHANGE MAP BUT NOT FIX AND I CHIKED TIMING IS GOOD

WAT I CANE DO

 FIRING

Edited 28 December, 2013 by MohamedKaram