Hello this is my first post and I was someone could help

 

Does anybody know the torque settings for replacing my Skoda Fabia 1.2 Classic Front Brakes?

 

If not who should I contact to find them out

 

Thanks

Edited 16 September, 201411 yr by fishyflanker

For the front caliper slide pins?

 

28Nm  (21lbf ft).

 

And welcome along

Thank you, I am not doing it personally myself ( so dont know exactly which settings are relevant) and have just been asked to get all the torque settings for the brake replacement. 

 

I am replacing the front pads and brake shoes on both wheels

 

Are any other settings needed?

Edited 16 September, 201411 yr by fishyflanker

Don't think you need any torque settings for the rear as it's just a screw and the brake drum comes off.

Is the side pins setting the only ones needed? Any other torque settings? (front brake only)

 

Thanks

TBH you don't really need any torque settings for changing the brake pads/shoes. Most people just know how much to tighten stuff. But yeah, if they want to use torque settings, the slider pins are the only thing you need.

Roadwheel bolts: 120Nm.

 

Also, make sure that whoever does the job checks that the slide pins do actually seem to allow the calipers to move about as required.