Does anybody have this installed in its Octavia 3? Or also Superb 2?
I expect that this is only a sw feature with steering assistance and maybe it could be activated. Has anybody already tried this?

Edited 5 February, 201511 yr by mtl

Is that the fatigue detection?

 

It is standard on most UK models I think

Yes, fatigue detection.

Sadly over here it is not standard, and I am trying to figure out, how can it be activated. I will get tomorrow adaptation channel map and coding for modules 9, 10 and 17 from a car that has this installed and then check to other cars.

Edited 9 February, 201511 yr by mtl

Get one from 5F as well hint hint

Sent from my HTC One_M8 using Tapatalk

Good point. Will do .

Do you know what it translates to in German. VAG like 3 letter acronyms, for instance VZE is traffic sign recognition.

I can send you the adaptation maps of 09 and 5F from mine if that helps.

Sent from my HTC One_M8 using Tapatalk

Sadly no. In German this is Müdigkeitserkennung.

 

But here is the proof that this is just a SW function :

http://www.gute-fahrt.de/bauanleitungen/assistenzsysteme_sicherheit/wach-dienst/a11757/fotostrecke/434819/434821.html#gallery-434819

And the question is if VCDS will do it or VCP will be needed.

And here is official activation set:

https://shops.volkswagen.com/de_DE/web/zubehoer/p/m%C3%BCdigkeitserkennung-f%C3%BCr-golf-7--golf-sportsvan-5g0054801-9

 

Edit: acronym for Müdigkeitserkennung is MKE.
 

Edited 9 February, 201511 yr by mtl

(65)-Vehicle function list BAP-weariness_rcognition_0x22 activated 

(66)-Vehicle function list BAP-weariness_rcognition_0x22_msg_bus Databus Infotainment 

(65)-Vehicle function list BAP; extension-weariness_rcognition_0x22 activated 

(66)-Vehicle function list BAP; extension-weariness_rcognition_0x22_msg_bus Databus Infotainment 

(176)-Vehicle menu operation-menu_display_weariness_recognition activated 

(177)-Vehicle menu operation-menu_display_weariness_recognition_clamp_15_off not activated 

(178)-Vehicle menu operation-menu_display_weariness_recognition_over_threshold_high activated 

(179)-Vehicle menu operation-menu_display_weariness_recognition_standstill not activated 

(180)-Vehicle menu operation-menu_display_weariness_recognition_after_disclaimer not activated 

 

 

All from 5F - couldn't see any other references in 5F

 

My coding on a Columbus with Canton is:03730201000000001111120200A800002F0003F601000100F6

 

And in CAN Gateway

 

MKE Check box activated

I take it you have read through this lengthy thread

 

https://vcp-forum.de/viewtopic.php?f=2&t=14&hilit=MKE

Will have a look during this week. VCP does the work .

Yep, looks like the PRCoder to do it

Hi does the VCDS do the trick if yes is there any guide?