Hello guys i have a golf mk7 , i think the adaptations are the same , any one know how to make this adaptation ? 

I want to know if any one here know how to change the intensity of DRL when turn on the blinkers ? Because when you are using the DRL and turn on the blinker the intensity of DRL drops down , and i want to control that intensity.

I already know how to change the intensity in the DRL , but i don't when turn on the blinker 
Any one know with channel control this function ? 
Thanks guys !

Here should help

Thanks for the link ! but i made a search on the link and i didn't find out were and how to do it ...

I want to control the intensity of the DRL when the blinkers are on 

Can you please put a "map" to how to do it ?? it will be very helpful !!! 

Thanks a lot !!

This is taken directly from the post andyvee put up:

 

Controller 09 - Central Electronics

16 - Security Access - enter 31347

10 - Adaptations

 

DRL led light bar dimming when indicating

(16)Leuchte2SL VLB10-Lichtfunktion G 2 from "not active" to "Blinken links aktiv beide Phasen" 

(18)Leuchte2SL VLB10-Dimmwert GH 2 from “0” to “35” (20 or less will disable the light bar during indicating) Mine is set to 30

(19)Leuchte2SL VLB10-Dimming Direction GH 2 from "maximise" to "minimize" 

 

(16)Leuchte3SL VRB21-Lichtfunktion G 3 auf "not active" to "Blinken rechts aktiv beide Phasen" 

(18)Leuchte3SL VRB21-Dimmwert GH 3 from “0” to “35” (20 or less will disable the light bar during indicating) Mine is set to 30

(19)Leuchte3SL VRB21-Dimming Direction GH 3 from "maximise" to "minimize" 

Hello guys i have a golf mk7 , i think the adaptations are the same , any one know how to make this adaptation ?

I want to know if any one here know how to change the intensity of DRL when turn on the blinkers ? Because when you are using the DRL and turn on the blinker the intensity of DRL drops down , and i want to control that intensity.

I already know how to change the intensity in the DRL , but i don't when turn on the blinker

Any one know with channel control this function ?

Thanks guys !

If you get an adaptation channel map from controller 09 then drop me a PM and attach it.

Sent from my HTC One_M8 using Tapatalk

 

This is taken directly from the post andyvee put up:

 

Controller 09 - Central Electronics

16 - Security Access - enter 31347

10 - Adaptations

 

DRL led light bar dimming when indicating

(16)Leuchte2SL VLB10-Lichtfunktion G 2 from "not active" to "Blinken links aktiv beide Phasen" 

(18)Leuchte2SL VLB10-Dimmwert GH 2 from “0” to “35” (20 or less will disable the light bar during indicating) Mine is set to 30

(19)Leuchte2SL VLB10-Dimming Direction GH 2 from "maximise" to "minimize" 

 

(16)Leuchte3SL VRB21-Lichtfunktion G 3 auf "not active" to "Blinken rechts aktiv beide Phasen" 

(18)Leuchte3SL VRB21-Dimmwert GH 3 from “0” to “35” (20 or less will disable the light bar during indicating) Mine is set to 30

(19)Leuchte3SL VRB21-Dimming Direction GH 3 from "maximise" to "minimize" 

 

Thank a lot !!Thats very helpful !!

Just one more question : i control the intensity from 0 to 35 ?? or the other channel choosing to maximise or minimize ?? 

thanks again !! 

If you get an adaptation channel map from controller 09 then drop me a PM and attach it.

Sent from my HTC One_M8 using Tapatalk

I don't have it , but if i found i certainly put here !! 

and again thanks a lot for your help !