http://www.briskoda.net/forums/topic/374414-reversing-cameras-high-version-this-time/

Im looking to add a camera too mine when funds allow & I'm thinking off adding this to the bumper in-between the number plate lights as mine is the hatch version & i have vcds too code it with already.

 

http://www.ebay.co.uk/itm/271956352926?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

On 11/7/2015 at 16:29, contractor said:

Yeah guys in a garage had to cut it, because original trunk lid knob is 2 cm. shorter and a bit narrow rather then Tiguan's. They used original paint, anti-rust grease to protect the edge of those cuttings. Then the hardest thing that control unit is not gonna work with Skoda can bus and it has to be flashed with different firmware for this control unit. As you flash the unit it appears in VCDS and you may code it. While I switch gear to reverse camera turns on and image of what is going on at my back with lined guidance and streams to head unit. Parking sensor still working at the process of reverse. The only thing that drives me little bit crazy, that red line appear to be in 30 cm. in front of an objects in fact it is only 10cm. And you can hear that bloody beeping noise. That is why I think I need calibration though.

 

Hello Contractor, could you please explain, how to flash camera control unit with FW working with Skoda cars. I already installed camera+control unit originally for Tiguan in my Skoda O2 FL 2010, I coded gateway for "VW Offroad". Camera is working well, but there is a problem with stuck Maxidot display on phone menu. Somebody mentioned, that new FW for camera control unit can solve this issue, thanks for help  

Edited 4 February, 20188 yr by salate