Jump to content

VCDS showing fault on 3 week old car, something or nothing....


Recommended Posts

Hi Folks!

 

As per the title. Error below:

 

 

Address 19: CAN Gateway (J533)       Labels: 5Q0-907-530-V1.clb
   Part No SW: 5Q0 907 530 AF    HW: 5Q0 907 530 F
   Component: GW MQB High   128 1223  
   Revision: --------    Serial number: 0003834171
   Coding: 030100040F087300EB00026A080F00010001050000000000000000000000
   Shop #: WSC 73430 790 00000
   ASAM Dataset: EV_GatewLear 013020
   ROD: EV_GatewLear.rod
   VCID: 75E656B7D474FF9652-8020
 
   Alternator: 
 
   Multifunction unit control module: 
   Subsystem 2 - Part No SW: 3V0 919 719 A    HW: 3V0 919 719 A
   Component: E221__MFL-PR6  H02 0150 
   Serial number: 000000000D1257270815
 
   Battery Monitoring Control Module: 
   Subsystem 3 - Part No SW: 5Q0 915 181 H    HW: 5Q0 915 181 H
   Component: J367-BDMConti  H02 1011 
   Serial number: 74185704001508172946
 
1 Fault Found:
8531970 - Quiescent Current 
          U1406 00 [008] - Too High
          Intermittent - Confirmed - Tested Since Memory Clear
             Freeze Frame:
                    Fault Status: 00000001
                    Fault Priority: 7
                    Fault Frequency: 1
                    Reset counter: 90
                    Mileage: 1830 km
                    Date: 2016.01.08
                    Time: 19:48:51
 

Anyone else seen this on theirs?
 
Thanks
 
Link to comment
Share on other sites

From the scan the fault has only occurred once and has a priority 7; may affect comfort settings but not drive ability of car. This link explains the priority codes (table midway down page):

http://www.ross-tech.com/vcds/tour/dtc_screen.php

2 options: clear and see if it returns or leave it logged so it will be down loaded / recorded by dealer when in for maintenance etc. I would leave it logged.

In terms of the fault have you had any issues with stop/start? Or onboard diagnostics giving a fault in the CAR menu?

  • Like 1
Link to comment
Share on other sites

In layman's terms, the State of Charge module (SOC) monitors the battery drain so it knows when start/stop can be used. As said above, if you leave something plugged into the 12V lighter socket and switch off the ignition, the SOC module sees excessive current drain and logs that fault. Happens on mine when I leave the dash cams running when parked up.

Link to comment
Share on other sites

  • 3 months later...

2 weeks old car, should i be concerned? No warning lights, doesn't feel there's anything wrong but since it's new it's hard to tell.

 

Address 02: Auto Trans (J743)       Labels: 0D9-927-770.clb
  

10 Faults Found:
21153 - Gear 1
          P072C 00 [002] - Not Selectable
          Intermittent - Not Confirmed - Tested Since Memory Clear
             Freeze Frame:

21154 - Gear 2
          P072D 00 [002] - Not Selectable
          Intermittent - Not Confirmed - Tested Since Memory Clear
             Freeze Frame:

21155 - Gear 3
          P072E 00 [002] - Not Selectable
          Intermittent - Not Confirmed - Tested Since Memory Clear
             Freeze Frame:

21156 - Gear 4
          P072F 00 [002] - Not Selectable
          Intermittent - Not Confirmed - Tested Since Memory Clear
             Freeze Frame:

21157 - Gear 5
          P073A 00 [002] - Not Selectable
          Intermittent - Not Confirmed - Tested Since Memory Clear
             Freeze Frame:

21159 - Gear R
          P072B 00 [002] - Not Selectable
          Intermittent - Not Confirmed - Tested Since Memory Clear
             Freeze Frame:

10731 - Valve 3 in Transmission Part 1
          P174A 00 [002] - Electrical malfunction
          Intermittent - Not Confirmed - Tested Since Memory Clear
             Freeze Frame:

10732 - Valve 3 in Transmission Part 2
          P174E 00 [002] - Electrical malfunction
          Intermittent - Not Confirmed - Tested Since Memory Clear
             Freeze Frame:

21207 - Pressure Control Solenoid 3
          P0797 00 [002] - Short to Plus
          Intermittent - Not Confirmed - Tested Since Memory Clear
             Freeze Frame:

10906 - Cooling Oil Valve
          P179D 00 [002] - Electrical Malfunction
          Intermittent - Not Confirmed - Tested Since Memory Clear
             Freeze Frame:

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Community Partner

×
×
  • Create New...

Important Information

Welcome to BRISKODA. Please note the following important links Terms of Use. We have a comprehensive Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.