Help needed. Fitting a VRS spoiler

[PGA78]

I've just been given a Vrs spoiler for my MK1 Octy but need some advice on fitting it.  Are there any pre-marked points for drilling inside the tailgate or is it a case of mark and drill from the outside, apply some tiger seal, and bolt on from underneath?

 

 

[Leeboy]

Yep,  pretty much as you say.   Mark up over a layer of masking tape and that will minimise the chance of your drill bit skating across your shiny boot lid paintwork.   

[octyal]

Measure twice, drill once as well!!!

 

If you can get some measurements off a vRS first

[PGA78]

Great, thanks for that.  I'm getting on to it this weekend so so plenty of measuring and bravery it is then