Footwell light error after upgrading to LEDs

[SeanG]

Hi folks,

 

i upgraded the interior lights with LEDs (from LedPerf) and I’m now getting the error below (shown in bold) when I scan using OBDeleven. I cleared the error when I first ran the scan after the swap over, but scanned it again the other day and got the error again. Any ideas? More concerned that it IS a problem rather than the car just not recognising then correctly. I did notice that the battery level was “Amber” and wonder8ng if there is some draw on power still occurring?

 

Many thanks,

Sean

 

Car: Skoda Octavia Sportline
    Year: 2018
    Body type: Saloon
    Engine: CRMB 110 kW (150 HP) 2 l
    Mileage: 3008 KM

---------------------------------------------------------------
09 Central Electrics

    System description: BCM MQBAB H  
    Software number: 5Q0937084CQ
    Software version: 0253
    Hardware number: 5Q0937084CG
    Hardware version: H36
    Serial number: 01001733201513
    ODX name: EV_BCMMQB
    ODX version: 018001
    Long coding: 000000000000000000000000000000000000000000000000000000000000

    Subsystems: 
        System description: WWS371 171009
        Software version: 0915
        Hardware version: 051
        Serial number: 887253F0401728200196
        Long coding: 164DDD

        System description: RLHS         
        Software version: 0105
        Hardware version: 047
        Serial number: S5Y17M12D04H05M21S55
        Long coding: 00885D

        System description: J245 PS72.405
        Software version: 0005
        Hardware version: H04
        Serial number: 0000FST001VSQ2G00000
        Long coding: 981803

    Trouble codes: 
        B11FF01 - Footwell lighting Electrical error
            static
                Date: 2018-03-10 11:42:52
                Mileage: 3010 km
                Priority: 6
                Malfunction frequency counter: 1
                Unlearning counter: 89
                Terminal 15 status: On
                Terminal 50 status: Off
                Voltage: 11.7 V
                Outside air temperature: 9.0 °C
                Status Bremslichtschalter (HW): On
                Status Bremslichtschalter (CAN): On
                Off: not activated
                Parking light: not activated
                Automatic high beam assist: operated
                Low beam: not activated
                Parking light left: not activated
                Parking light right: not activated
                Letzte Weckursache/ Werte [00;2E]: keine Störschutzursache
                CAN-Bus_aktiv: On

 

[gabi2004]

I guess u can code them led...in  09 central electronics

[ebwmcs]

09 central electronics

Leuchte30FR LC72

Lasttyp 30,

change to
36 - LED Kleinleistung

[SeanG]

Cheers. That worked a treat. Re-ran the scan and no errors showing happy days!  Thanks for your help. 

[SeanG]

3 hours ago, ebwmcs said:

09 central electronics

Leuchte30FR LC72

Lasttyp 30,

change to
36 - LED Kleinleistung

 

Cheers. That worked a treat. Re-ran the scan and no errors showing happy days!  Thanks for your help. 

[ebwmcs]

4 hours ago, SeanG said:

 

Cheers. That worked a treat. Re-ran the scan and no errors showing happy days!  Thanks for your help. 

Good job,have a good day!

[charly129]

excellent advice, works a treat on my 2020 VRS 245, thanks SeanG