Dash Cluster Terminals + other Terminals - Part No.s req.

[Flyfisherman]

Gang@ Briskoda

 

Does anybody know the part no.s of the terminals that go into the snap lock connector on the rear of the dash cluster - there are two sizes. 1 is about 1/32" and the other about 1/16" - same size terminals are the heater controls + main lighting switch. Also could you advise where to purchase these terminals.

 

Cheers

paul

Edited 2 April, 2018 by Flyfisherman

[dilksie]

Try here

 

http://www.vehicle-wiring-products.eu/section.php/206/1/terminals-to-fit-mouldings

 

 

[Cryonut]

Link below are the terminals i used for the light switch and CECM when fitting footwell lights

 

 

https://www.ebay.co.uk/itm/AUDI-VW-Skoda-Seat-Porsche-10-x-crimp-terminals-pins-000979009E-Connector-Repair/183072762809?hash=item2a9ffcabb9:g:CV8AAOSwFMdab3Q8

[Flyfisherman]

Thanks guys