Part Number for Oil Level Sensor

[OctyEstatevRS]

Anyone got the part number for the above?

 

Will be going to TPS but need to make sure it's the right one.

 

Octavia vRS in case they different across the range.

[Guest]

1J0907660B same across the range I believe. I  always use this site for parts, http://www.oemepc.com/skoda/part_single/catalog/sk/markt/CZ/modell/OCT/year/2002/drive_standart/252/hg_ug/919/subcategory/919040/part_id/2564543/lang/e#sec_32

[OctyEstatevRS]

Thanks

 

I have found the problem (maybe) the wires into have either come out of the connector or are broken.

 

So need to replace (or bodge like it has been before by looks of it) the wires and or connector.

[Breezy_Pete]

Quite common for these wires to get damaged I think, shame you're not closer, I'd happily have a go at fixing that for you.

I'll see if I can find a part number for the connector.

[Breezy_Pete]

https://www.ebay.co.uk/sch/i.html?_from=R40&_trksid=p2322090.m570.l1313.TR1.TRC0.A0.H0.X1J0973704.TRS0&_nkw=1J0973704&_sacat=0

 

Maybe pick one with wires already installed, for ease?

 

I'm reasonably sure that'll be the right part number, but compare pics with what's on your car.

 

All wrong above so crossed out.

Edited 11 November, 2018 by Wino

[OctyEstatevRS]

2 wire.

 

Will go in TPS tomorrow and see if they can find it on the system. 

 

Cheers for the help so far!

[Breezy_Pete]

 

Not the right sensor if it only has two wires?

[Breezy_Pete]

Actually it should be a 3-pin, now I think about it.

[OctyEstatevRS]

Bit dark and raining for me to go take pics at the moment haha

 

But only one wire is left in the connector and the other wire, well, isnt. 

 

Will try and have a proper look tomorrow.

[Breezy_Pete]

I've crossed out my previous bum steer above, but I think this might be right: https://www.ebay.co.uk/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=3D0+973+703+&_sacat=0

First item 25 here: https://skoda.7zap.com/en/cz/octavia/oct/2002-252/9/971-971010/#25

[OctyEstatevRS]

Hmmmmm, wonder why mine only 2 wires?

 

Really need to get it up in the air properly.

 

 

[Breezy_Pete]

What year is your car?

[OctyEstatevRS]

2004 1.8T

[Breezy_Pete]

Is that an AUQ engine code?

If so, there should be a brown earth wire on the middle pin, a yellow/black ignition 12v on pin 1 and a purple/white output wire on pin 3, I reckon

[OctyEstatevRS]

Anyone got an idea of what gauge the wire is?

 

It's so can get hold of a repair plug.

[Breezy_Pete]

The ignition 12V is 1mm² from the sensor to a 14-way connector somewhere on the left of the engine bay, but then only 0.5mm² from there to its fuse, the other two are both 0.5mm².

For the short distance of the repair, 0.5mm² for all three is sure to be sufficient. That's 22AWG or 16/0.2 in other units.

Edited 12 November, 2018 by Wino