I am scavenging interior trim parts that are compatible to my vrs from a scrap yard owned by mate, just a couple of questions, the scrap car has suffered mechanical failure so not one bit of damage at all, its a 2003 1.4 mpi version.

The bonnet slam panel is in good condition am I correct in assuming that it will fit my 2006 vrs.

Also a question on the air filter air box, not sure if it looks the same, can anyone advise if it is as my vrs one.

Would all the glass be the same or is it a waste of time getting it out (not windscreen) mine is ok except the creeping delamination on the lower edges of the hatch glass.

Anyone suggest other possible parts that would be generic to mine worth getting.

The steel wheels look quite rough tho.

Its due to be crushed shortly.

Thanks

Martin

 

Look for part number agreements by navigating to the relevant pages in here: https://skoda.7zap.com/en/cz/fabia/fab/

Slam panel and glass will be in the 'body' group, airboxes in 'engine'. 

Thanks for the help Wino.

Hi Wino, been looking all evening ,slam panel looks generic, air filter box appears the same but ASZ has lots more pipes going on.

So at least looking ok.

Doors and hatch ,bonnet look good but would take up too much room for a just in case needed scenario.