Hey!

 

My MIB1  is broken.  I can buy used unit-unlocked.  Can somebody tell me how is with programing this unit? I must programing unit for my car.

Can somebody here help me how to set this up? 

Deactivated back camera and activated only sensors....and other...

 

Thanx

Nobody??

If you're replacing like for like, you don't need a unlocked/hacked unit.

 

Have a dealer remove component protection, re-enable the SWaP/FeC codes and revert to factory coding/adaptions.

 

If you do want a hacked unit, you should copy the coding and adaptions from your old unit

I have buy used unit CP unlocked.

 

I have replaced mib1 for mib1,so the same unit.

 

After instalation,all function works.

 

But with obdeleven scaner i have fault code in  Gateway: U110100.  And Multimedia-5F :  code- B201200 and B201A00 and U111100.

 

Can u tell me how to set correct?

 

 

Edited 5 February, 20215 yr by Skodilakrs1

6 minutes ago, Skodilakrs1 said:

I have buy used unit CP unlocked.

 

But with obdeleven scaner i have fault code in  Gateway: U110100.  And Multimedia-5F :  code- B201200 and B201A00 and U111100.

 

Can u tell me how to set correct?

With a unit hacked to remove CP this error will always be present.

After a quick google:

1) U110100 seems to be component protection active

2) B201200 seems to be implausible dataset

3) B201A00 seems to be SVM update

4) U111100 seems to be missing message

 

1) is probably due to it being hacked

2) needs ODIS or VCP to upload the correct dataset

3) can be cleared get generating a XOR'ed code

4) is likely coding related

 

I'd suggest you contact the person you bought it from for support.

 

Without the original coding and adaptions, it's hard to suggest an corrective action 

2 hours ago, Skodilakrs1 said:

I have buy used unit CP unlocked.

 

I have replaced mib1 for mib1,so the same unit.

 

After instalation,all function works.

 

But with obdeleven scaner i have fault code in  Gateway: U110100.  And Multimedia-5F :  code- B201200 and B201A00 and U111100.

 

Can u tell me how to set correct?

 

 

Speak with @pab567 who maybe able to get you a new MIB unit (even an MIB2 unit) that is properly modified for your car.

2 hours ago, PetrolDave said:

With a unit hacked to remove CP this error will always be present.
 

Hi

 

Really?  So no more scans car without fault code:)

Its realy mess with this units.

 

I have in my car drive mode option. Now the button is dead..nothing happen when press button. 
yikes

You can potentially have the same issues with any incorrectly coded unit...

 

Maybe check your OBDeleven history for previous scans..?

I have history from old unit yes.

 

But how can i find what must i change?

I dont know what to search for drive mode menu. 

Car dealer says that they cannot do coding.

 

 

 

If it's the same unit, copy the entire coding...

How do you mean copy entire coding?

 

 

The radio has a long coding and some adaption channels.

 

Ideally you need to copy the long coding and all adaption channels from the old radio to the new. This is pretty easy with VCDS assuming you have an autoscan and adpmap.

 

However, I've never used OBDeleven so I can't add any specific steps I'm afraid 

Ok,

thank you

13 hours ago, Skodilakrs1 said:

I have in my car drive mode option. Now the button is dead..nothing happen when press button. 

Drive mode needs an FEC (Feature Enable Code) - if you told the supplier of your hacked unit that you have Drive Mode they SHOULD have activated it.

 

Sounds like whoever hacked your new unit didn't do a thorough job.

Unit is from ebay used. 
 

FEC for Drive Mode Selection is insatlled in gateway. You have it inactive becasue adaptations were not setup properly - look for adaptation channel with word "charisma" and have it enabled.