Skip to content

Cranks but will not start

Featured Replies

Hi - My son reported a loss of power driving our Fabia 1.2 BME yesterday - top speed was 40mph. I went to investigate and the car started normally but VCDS-lite shows fault "16686 Cylinder 2 Misfire detected", I took the car for a short drive without any problems.

 

She is on 106k miles and due new spark plugs so I swapped them out. Started the car and the engine was lumpy again as my son had reported, presumably running off 2 cylinders. Reseated the spark plugs but still had a lumpy engine. Swapped out the Ignition Coil on #2 and now the car cranks but will not start. Fitted the original ignition coil on #2 but still the car will crank but not start.

 

I ran a full scan using VCDS-lite and it showed fault "01314 Engine Control Module" but on Address 03: ABS Brakes. Not sure if that is related or red herring.

 

What should i be checking next? I can smell fuel, and i hear what i think is the Fuel pump kicking in on first click of the ignition. 

Edited by garibaldy

2 hours ago, garibaldy said:

What should i be checking next?

How fast is it cranking?

Does it sound like it it is trying to start or not?

  • Author
37 minutes ago, KenONeill said:

How fast is it cranking?

Does it sound like it it is trying to start or not?

This is going to be a subjective response :-) but in my opinion it is cranking well (battery was replaced a couple of months ago) but there isn't any signs of the engine starting.

If I place my foot on the accelerator (not sure what that does these days) there's a hint of it trying to start - but minimal. 

41 minutes ago, garibaldy said:

there isn't any signs of the engine starting.

Which suggests to me that you may have a fuel flow problem or no ignition.

  • Sponsor

Checked any fuses?

 Ignition coil feed is #52

When you say you 'swapped out' coil 2, do you mean moved it to another cylinder, or fitted a new one there?

  • Author
22 minutes ago, Wino said:

Checked any fuses?

 Ignition coil feed is #52

When you say you 'swapped out' coil 2, do you mean moved it to another cylinder, or fitted a new one there?

 

I haven't checked any fuses, but will check fuse #52.

Fitted a new coil pack.

Edited by garibaldy

  • Author
18 hours ago, garibaldy said:

 

I haven't checked any fuses, but will check fuse #52.

Fitted a new coil pack.

 

Fuse 52 had blown. Engine now starts and is running smoothly, so just need to see if that fixes the misfire.

 

Thanks Wino!

  • Author

What would have caused the fuse to blow? 

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Important Information

Welcome to BRISKODA. Please note the following important links Terms of Use. We have a comprehensive Privacy Policy. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.

Account

Navigation

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.