Skip to content

What is this bolt in front of the engine?

Featured Replies

3 hours ago, Thefeliciahacker said:

yeah i know what it means, i have C2 + 2years exp in the UK😅

OK, fair enough.  Didn't want you thinking I was being intentionally or unintentionally rude or British humour.  I have E5 but lots more experience.  😁

 

  • 3 weeks later...
  • Author

Bad news...

 

I suspected from another source of leak and finally found this:

Now please if anyone knows, what is this mysterious recess?

DSC_20220824_102753.thumb.jpg.e4c955addd5ab2e5f359fc6da058af88.jpg

 

This picture above is from my engine. I used a mirror to take the picture so it's inverted. The mysterious recess is well hidden from eyesight. It's just below the bolt I've asked before. I couldn't notice this before because it was covered in oily muck.

 

It's angled downwards. I'm afraid it might be some kind of over pressure relief plug. If that's so, I think it's impossible to fix it without removing the engine?

 

I can't imagine removing the engine because of this. :crying:

  • Author
On 25/08/2022 at 01:27, R_Blue said:

Now please if anyone knows, what is this mysterious recess?

I've found something about it.

107102000.png

It's number 32.

It's an 8mm plug. Like a freeze plug but installed on an oil channel. N90796301

Now, how would you replace an 8mm plug on an oil channel without removing the engine?

12 hours ago, R_Blue said:

how would you replace an 8mm plug on an oil channel without removing the engine?

 

A hexagon inox bolt with copper washer?

  • Author
5 hours ago, D.FYLAKTOS said:

A hexagon inox bolt with copper washer?

No, it's a metal cap. Like these:

ctrp_0811_04_z-freeze_plugs-installation

 

But very small diameter. Only 8mm.

  • 2 weeks later...

Yes it's an oil gallery machining port. 

I would advise to either find a freeze plug or tap it and install a SHORT BOLT

On 28/08/2022 at 01:40, R_Blue said:

Now, how would you replace an 8mm plug on an oil channel without removing the engine?

Drill a 2mm hole insert a wood screw and pull like mad

  • Author
7 hours ago, Thefeliciahacker said:

Drill a 2mm hole insert a wood screw and pull like mad

Shouldn't I worry about metal dust inside?

 

Great ideas by the way. I'm glad you are active again. I missed your posts.

13 hours ago, R_Blue said:

Shouldn't I worry about metal dust inside?

should you?
i mean you can use grease,

low rpm and you have an oil filter as well

13 hours ago, R_Blue said:

I'm glad you are active again. I missed your posts.

dont worry friend thefeliciahacker is not abandoning this forum

Create an account or sign in to comment

Recently Browsing 0

  • No registered users viewing this page.

Account

Navigation

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.