Hi, there is many topics about the failure of wirers passing from the door post and the doors,  well i have a wire which has  broke so the power windows do not work as they should. I had to remove the door rubber boot to get access to the broken wire, However I should have pulled some harness through the boot to do the repair. so may question is has anyone else removed the door side of the boot. I cannot see how the boot was fixed in place. there is 2 plastic tabs and thats it. I do intend fitting a new harness as a number of wires have insulation damage. Is the door side of the boot glued in place? cheers.

From what I remember on a "Roomster "the rubber boot just fits in like a grommet, not glued. 

Thankyou for your reply, I have taken off the bellows on the  right hand door side ,  Part number 1k0959843C to repair a broken window wire grey and white , I have looked on youtube and searched this foram to find out how to fit the bellow back, but fail to see our it fits, there is no rubber lip to hold the rubber in place like a grommet so Iam lost as to how it fitted. Cheers

Is it possible to post pictures?

hi, there, if you go on ebay > look for VW 1k0959843C you will see a picture.  . I looked for the broken wire inside the bellows but could not find so i removed the speaker put my hand in and pushed out the bellow . thanks for your time.

So are you saying you've sorted it ? 

no not sorted, have an local auto electrician coming to fit new door harness and bellows. I did find the broken wire made a connection and the windows worked as they should but, at least four of the wires inside the bellows showed damage , best  to have new harness i think. as i have said i removed the bellows on the door side fixed the wire but could not get the bellow to fix back . thankyou for your time. there is not much info on the door side bellow fitting as most people find wires close to the door post connection block damaged .Cheers nz100