Hello,

 

I have a RNS510 navigation on Superb 2

i bought a Novero HT-5 bluetooth module : 3C8 035 730 D

i managed to install the module and almost everything works fine

 

- phone manage to connect Fast, calls are working perfectly

- phone part: everything okay 

 

The problem: I manage to put music from my phone with Bluetooth, I can even change it from buttons-Navi plus steering wheel

 

BUT music is working just on the right side- just right speakers

 

i managed to find something on your forum but not enough. I found that old module supported just MONO and that’s probably why.

 

my question right now is what I can do to solve the issue. Because I want to use Bluetooth music for all speakers, obviously 

 

any suggestions? Maybe someone can remember what he did and what I need to buy exactly

 

attached pictures with my Navi and new Bluetooth module.

 

i wait for your kindly reply and thank you very much !

I found a solution: cable from 9W2 to 9W7

do you think that this will solve the problem ?

Your module supports both channels but the harness you get has connection only for one channel - you must add two wires between the black module bplug and green radio plug.

Hello,

 

yes, i think that this is the situation

I will buy one new cable from the navigation to Bluetooth 

 

this one from above. Is just 35 euros and will solve all my problems

 

you are the best

thanks again !

On 21/06/2023 at 14:17, pab567 said:

Your module supports both channels but the harness you get has connection only for one channel - you must add two wires between the black module bplug and green radio plug.

Hi. I have the same problem. I think I can add the wires, but how do I know which pins they go in? Is there a diagram or some guidance?

BT Harness pin 4 -> Head Unit pin 11
BT Harness pin 5 -> Head Unit pin 5

Thank you so much!